This resistor pack was an exact fit for my wife's Golf plus 2008 and instantly cured the heater fan control issue. There appear to be a couple of slightly different variant. Check photos to ensure match. Easy access from footwell. Simple push and slide into place and reconnect cable.Way more straightforward than some other cars where whole control boards have to be exchanged and half the dashboard has to come apart. Recommend replacing pollen filter at same time as fouled filters can be a cause of resistor pack failure.
Verified purchase: Yes | Condition: New
I bought this to see if it would fix my caddy's blower which only worked on number 4. It worked straight away so no apparent seizure of the fan, but...jeez the smell is awful. It smells like burning plastic or rubber more so when in number 1 or 2. Some people have even said fish in their reviews and I know where they are coming from. At least it solved the problem which is why I bought it as it was so cheap. Now I know the problem was the resistor I'll buy a decent one but this is worth it to see if that's your issue.
Verified purchase: Yes | Condition: New
This is definitely the part you need if the fan ain't working on 1 2 3 but is on 4 full. Unfortunately the part is over heating too much and burning off constantly releasing toxic gases into the car though it might be a one off start phase but alas not.
Verified purchase: Yes | Condition: New
Speeds 1 & 2 stopped working on my caddy, I had the electrics by a garage who confirmed that nothing was amiss other than the resistor had burned itself out, my caddy is 15 years old so not really surprising, after fitting this fan speed resistor it lasted about 5 minutes before burning itself out, I've since purchased a new from the dealers and it's working perfectly, yes the one from the dealers was considerably more expensive, but its obviously far better quality than the peice of junk I bought of eBay.
Verified purchase: Yes | Condition: New
Looking to find the right part which was delivered on time and was easy to fit, and more important it worked fine, i would recommend this company.
Verified purchase: Yes | Condition: New
Good price and product works well would recommend
Verified purchase: Yes | Condition: New
Simple and straight forward to swop with the original product and the whole process only took 2 minutes!
Verified purchase: Yes | Condition: New
Fitted for 4 weeks and working well. The original failed because the blower motor bearings needed lubrication, so check them as well. I needed to replace the 40a fuse as well. Still working, but did need new motor in the end
Verified purchase: Yes | Condition: New
Good direct and affordable replacement
Verified purchase: Yes | Condition: New
Early days yet as I've had some of these over the years from various suppliers, some last longer than others.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in HVAC Blower Motors & Wheels
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on HVAC Blower Motors & Wheels