I installed this ground anchor into my garage floor to secure my motorbike using an Oxford Monster XL chain. The combination gives me great peace of mind. It was easy to install although requires a 16mm masonary drill bit which I didn't have (maybe add as an option to supply). Once installed it feels rock solid and the ball bearings in the hex nuts fit tight to stop easy access and the chain covers these anyway so they are almost impossible to access.
Verified purchase: Yes | Condition: New
Had to replace the rawl plugs as they shattered when i tried to tap them into the wall, so bought some new ones, This is more suited to a chain but i used a D lock and it did not give me enough room to manoevre the Lock between the back wheel spokes and frame on a mountain bike, it can be done, just fiddly and hurts the spokes..... Heard Oxford were a good name, I am not impressed.
Verified purchase: Yes | Condition: New
wow very strong . only thing is I had to drill deeper then said to make it flush againest wall . took ages to drill my holes as started getting tingle in wrist and didn't drill close to floor like it said as did it bit higher as then bit better to get my drill in and because took long time it didn't hurt my back as much . over all very good item . just use good drill bit
Verified purchase: Yes | Condition: New
It's a good lump of metal. It's main virtue is as a visual deterrent, with a huge link sort of chain. There is no such thing as total security. It does need both a 12mm and a 16mm drill bit to fit it, and really an SDS drill especially if drilling in to concrete. And if drilling in to the floor, one finds out the hard way whether the concrete is deep enough for the fixing. Having drilled the serious holes, to get a best result one needs a wire hole brush and a hole blower pump. Realistically, lots of people have fitted these without difficulty. But if you are careful, be prepared.
Verified purchase: Yes | Condition: New
Great anchor, very happy to secure my bike to it. I personally found nothing wrong the bolts or plugs, and please don't listen to the review about needing a18mm drill bit.... 16mm is perfect, there is always one that worries about size and says its bigger than is lol
Verified purchase: Yes | Condition: New
I had to take one of these out when moving home, I had a right game and made a lot of noise so they do what there supposed to 😂
Verified purchase: Yes | Condition: New
Bought this to secure my grandsons new moped. Very sturdy and easy to fit. The large chain and padlock goes through the centre perfectly. Looks very good quality and protected by good paint quality so it should not rust.
Verified purchase: Yes | Condition: New
Nice little anchour. Made well as you would expect from oxford. Large chain fits through no probs. The only down side, i had to get new fixing bolts, the ones supplied were not up to the job, the allen head on bolt was poor quality. Had too go and get better ones.... Hence 4 stars and not 5
Verified purchase: Yes | Condition: New
Relatively easy to fit. Appears strong. Hopefully never have to find out. Unfortunately no instructions included but found a video on line.
Verified purchase: Yes | Condition: New
Pretty solid, and, unless someone has their cordless angle grinder or a concrete breaker, they're unlikely to come off....I suppose a landrover and a tow rope might do it, but bolt croppers, allen keys and jacks aren't going to get through this!
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Ground & Wall Anchors
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Ground & Wall Anchors
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
