CURRENTLY SOLD OUT
 | Shop by category |
{"delay":300}
|
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Remote-Controlled Toys
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Remote-Controlled Toys
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
The first thing to know about this product is that it is a kit that requires a good deal of attention to assemble. When I assembled mine it took me about 45 minutes. On top of that I was so excited to get this kit together I immediately started inflating the shark balloon as soon as I brought it in from the mailbox outside. The problem was that it was a very cold day when the kit was delivered and the balloon itself was so cold that it was not as elastic as usual so I accidentally caused a rip in the mylar around where the helium tank inflates it. This caused a permanent leak, so I eventually had to order a replacement balloon. This was my fault, not a flaw in the manufacturing. Just make sure your balloon is room temperature before inflating. Also keep in mind that you need to invest in helium as well as batteries. That being said once the shark was up and going it was a blast! I have spent hours swimming it through our living room and hallways! If you don't mind a challenge and some extra investment then this kit is worth it!Read full review
Verified purchase: Yes | Condition: New
This is a flimsy toy confusing to assemble. First of all you have to inflate it first. That means either bringing it to a party store first (it will be big and awkward to bring home) or buying a tank of helium (which must be pure- try and find it). The directions are poorly written, it's easy to make a mistake. You are given adhesive pads which are not labeled but must be used in specific locations. You are trying to apply these pads to a huge balloon which is filled with helium and trying it's best to get away from you at every turn. It's best to have an assistant to help you and tie a LONG ribbon or string on it before you inflate it in case it gets away from you. Then you mount fins which are flimsy and easily broken while you struggle to finish assembling it. I recommend adding the fins last. The mechanical parts, the basic motor and tail fin mount with the same low tack adhesive pads which are subject to peeling off. I guess the adhesive is low tack in case you make a mistake. You may also have to pair the remote control to the motor which is not a big deal. Then you have to balance the unit with some putty "weights." After all that the tail fin on my unit did not work. Tried to contact the manufacturer for assistance but got no response. Even if it worked I doubt it would last more that one play session. It would not be easy to store and will need periodic helium fillups. If it worked I'm sure it could be fun initially but you have to determine if it is worth the effort and price.Read full review
Verified purchase: Yes | Condition: New
After buying the shark and unboxing, the instructions were out of date. Apparently the shark had went through a model change. There was a youtube video showing how to assemble wich was easier. The adhesive hooks and tape do not hold. The remote that controlls the shark while flying is very intermittent. The motor that makes the shark incline and decline is weak. Love the idea of this but just needs a little more design work and better quality parts.
Verified purchase: Yes | Condition: New
Solution to durability problem: 1. After the balloon has been inflated, carefully put strips of a lightweight tape on the areas that might touch things during flight i.e. the top, the nose of the shark, anywhere you think it might touch. That's it! Make sure you do this carefully so you don't mangle up the balloon. Even the lightest-duty packing tape will add a huge amount of protection without adding so much weight that the balloon won't want to fly. Cool cool idea. Maybe threse folks should take a look at the construction and add a light vinyl to the areas that could cause the balloon to pop.
Verified purchase: No
Difficult to assemble. The shark is so flimsy, it wouldn't stay afloat or go in the direction we tried to steer it in. The adhesive patches (to attach the tail and fins) fell off almost immediately. It entertained the kids for maybe 15 minutes, tops. A total waste of time and money!
Verified purchase: Yes | Condition: New
