Back to home page
|Listed in category:
The seller is away until 13 Jun, 2025. Add this item to your Watchlist to keep track of it.

Picture 1 of 3

Picture 1 of 3
Picture 2 of 3
Picture 3 of 3
Have one to sell?
Sell it yourself

DU-BRO Tru-Spin Prop Balancer (Adjustable for sm. & lg. props,Tires,Rotors) #499

phmacc-0
(30)
Registered as a private seller
Consumer protection regulations resulting from EU consumer law are therefore not applicable. eBay buyer protection still applies to most purchases.
Seller's other items
Contact seller
US $29.00
Approximately£21.44
Condition:
Used
“works great, large or small props, has very little use. Also used to check balance on arrows or RC ”... Read moreAbout condition
People are checking this out. 2 have added this to their Watchlist.
Postage:
US $4.84 (approx £3.58) USPS Ground Advantage®.
Located in: Springville, New York, United States
Delivery:
Estimated between Sat, 14 Jun and Sat, 21 Jun to 94104
Delivery time is estimated using our proprietary method which is based on the buyer's proximity to the item location, the delivery service selected, the seller's delivery history and other factors. Delivery times may vary, especially during peak periods.
Returns:
No returns accepted.
Payments:
    Diners Club

Shop with confidence

eBay Money Back Guarantee
Get the item you ordered or your money back. Learn moreeBay Money Back Guarantee - opens new window or tab
Report this item - opens in new window or tab
Seller assumes all responsibility for this listing.
eBay item number:286548393539

Item specifics

Condition
Used
An item that has been previously used. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or an item that has been returned to the seller after a period of use. See the seller’s listing for full details and description of any imperfections. See all condition definitionsopens in a new window or tab
Seller notes
“works great, large or small props, has very little use. Also used to check balance on arrows or RC ...
Model
Tru-Spin
MPN
499
Brand
DuBro
UPC
Does not apply

Item description from the seller

About this seller

phmacc-0

100% positive Feedback•44 items sold

Joined May 2019
Usually responds within 24 hours
Registered as a private sellerThereby, consumer rights stemming from EU consumer protection law do not apply. eBay buyer protection still applies to most purchases.
Seller's other itemsContact

Seller Feedback (16)

All ratings
Positive
Neutral
Negative
See all Feedback

Product ratings and reviews

Learn more
4.8
159 product ratings
  • 137 users rated this 5 out of 5 stars
  • 15 users rated this 4 out of 5 stars
  • 4 users rated this 3 out of 5 stars
  • 2 users rated this 2 out of 5 stars
  • 1 users rated this 1 out of 5 stars

Would recommend

Durable

Entertaining

Most relevant reviews

See all 104 reviews
  • by thug88
    19 Feb, 2016Most favourable review

    Great Balancer, but Needs Something...

    I have used this balancer to balance a large number of props, since receiving it. It's a great design, sturdy built and works great. It is especially useful in balancing larger, quadcopter/drone props like Phantom and Chroma. The balancer comes with a universal balance rod, that fits a wide range of prop sizes. However, when balancing fixed-nut props, like Phantom, you will need a special threaded rod, specific to the prop. Since these props will not allow the balance rod to pass completely "through" the center of the prop, a special rod is needed. Also, I wanted to balance even my small, lightweight props, like on a Syma X5C or other toy-grade quadcopters. These cheap props are typically very unbalanced, but have a very small shaft hole. This is a problem with ANY balancer, since no ...

    Verified purchase: YesCondition: NewSold by: rcsuperstore

  • by bruce1954
    19 Nov, 2017Most critical review

    Nice balancer BUT

    This is a great balancer after I worked on it. Two of the threaded rods would not accept the nuts and lock nuts. Luckily as a retired machinist, I knew what to do. After wire brushing the threads on my bench grinder, they fit ! The rest of the balancer seems to be high quality. Don’t know what happened to quality control with this one ? The average person would probably have to send it back. Hope this was helpful ! After Dubro read this ,they contacted me with an apology and sent two new post, free of charge ! Thanks to Dubro !!!

    Verified purchase: YesCondition: NewSold by: rcsuperstore

  • by paganlinuxgeek
    02 Nov, 2015

    Get what you pay for.

    This is the prop balancer that I recommend to others asking for suggestions. It's a bit more than some of the other models available, however it is fully adjustable to accommodate the larger props, threaded nut props (IE DJI, 3DR, etc). I've used this piece of equipment to balance phantom props, 5 and 6" props, as well as 13" t-style. A twist of 4 easy grip nuts allows you to change orientation for the threaded nut stype props, raise for the longer props, or even take down for easy storage out of the way. It compacts down small enough to fit in your field box if you want to take it along. Phantom operators will need to purchase a short threaded aluminium rod in addition as the included rod is intended for pass through use on standard prop designs.

    Verified purchase: YesCondition: NewSold by: bobbyrc-com

  • by raymantheairman
    02 Sep, 2016

    Very good balancing tool.

    This was really easy to use to get both spinners and propellers in balance with a high presicion. I balanced my spinner for my FMS P-51D with the propeller blades mounted on it after I weighed the blades individually on a gunpowderweight, and now there are no more vibrations in my plane whatsoever. It's easy to assemble right out of the box, comes with a very understandable instruction sheet, it's easy to use, and seems stable and accurate. Very happy with my choise of this tool from Du-Bro.

    Verified purchase: YesCondition: NewSold by: stlouis-rc

  • by slotcardave
    07 Nov, 2015

    Awesome Prop Balancer

    Had an issue with a slight vibration in my Drone, was able to determine one prop was out of balance with this product. Easy to use, I balanced the prop, an now no more vibration. I now test every prop, even if the manufactures says if balanced, I don't take their word for it. This makes it very easy and quick to test.

    Verified purchase: YesCondition: Pre-ownedSold by: diamondavid

More to explore: