This item is out of stock.

Picture 1 of 1

Have one to sell?

Sell it yourself

Z-poxy Finishing Resin (12 oz.)

Hobby Titan

(105445)

Seller's other items

Contact seller

US $34.79

Approximately£25.71

Condition:

New

Add to Watchlist

Postage:

Free USPS Ground Advantage®.

Located in: Virginia Beach, Virginia, United States

Delivery:

Estimated between Sat, 26 Jul and Fri, 1 Aug to 94104

Returns:

30 days return. Buyer pays for return postage. If you use an eBay delivery label, it will be deducted from your refund amount.

Payments:

Shop with confidence

eBay Money Back Guarantee

Get the item you ordered or your money back. Learn moreeBay Money Back Guarantee - opens new window or tab

Seller assumes all responsibility for this listing.

eBay item number:315902313333

Last updated on 21 Jul, 2025 07:19:05 BSTView all revisionsView all revisions

Item specifics

Condition: New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging ...

UPC: 0087093001558

About this product

Product Identifiers

Brand

ZAP

MPN

PT-40

UPC

0087093001558

Model

ZAP PT-40

eBay Product ID (ePID)

13021717937

Product Key Features

Color

Clear

Type

Glue & Adhesive

Item description from the seller

Seller business information

I certify that all my selling activities will comply with all EU laws and regulations.

About this seller

Joined Nov 2011

Usually responds within 24 hours

Registered as a business seller

Welcome to Hobby Titan! We offer everything you need for your gaming needs! We're expanding our line all the time, so check back soon to see what's new!

Visit shop Contact

Detailed seller ratings

Average for the last 12 months

Accurate description

4.9

Reasonable postage cost

4.9

Delivery time

5.0

Communication

5.0

Board & Card GamesCard AccessoriesDice and Dice AccessoriesHobby SuppliesNovels & Other MediaRPGsSecondhand BoardgamesSecondhand Other MinisSecondhand RPGs/Books

Seller Feedback (200,924)

k***8 (159)- Feedback left by buyer.
Past month
Verified purchase
Order shipped less than 24 hours after purchase in a box with enough room to be surrounded by some cylindrical peanuts. Game arrived safe & sound in the same condition as listed. I have bought from this seller before & would buy from them again.
RPG Miniatures Icons of the Realms Adventure in a Box - Mind Flayer Voyage (#315003333950)
w***e (53)- Feedback left by buyer.
Past month
Verified purchase
Game received was in new condition, still sealed in wrap as described. I paid a very fair price for the game and the shipping was as expected. The game arrived unharmed. I would definitely buy from this seller again.
Board Games Phantom Fury: Second Edition (#375862946018)
r***r (734)- Feedback left by buyer.
Past month
Verified purchase
Battletech miniature pack arrived as described. Great price. Excellent packaging. Highly recommended EBay Dealer for gaming materials!
Battletech Minis BattleTech: Inner Sphere - Battle Lance (#314193499725)

See all Feedback

Product ratings and reviews

Learn more

5.0

54 product ratings

52 users rated this 5 out of 5 stars
2 users rated this 4 out of 5 stars
0 users rated this 3 out of 5 stars
0 users rated this 2 out of 5 stars
0 users rated this 1 out of 5 stars

Would recommend

Durable

Entertaining

Most relevant reviews

See all 49 reviews

by neal-caiss
15 Feb, 2018Most favourable review
Best finishing resin I have ever used.
What can I say, I used this product for years to fiberglass R/C planes and boats. Great product. A little pricy, but you get what you pay for. One package will cover about a six foot wing, such as a Mustang or a P-47. Its not brittle like most fiberglass resins, but still sands easy. I use 80 grit sandpaper then go right to the primer. Looks good as a finishing coat if sanded with finer increments. What can I say, I used this product for years to fiberglass R/C planes and boats. Great product. A little pricy, but you get what you pay for. One package will cover about a six foot wing, such as a Mustang or a P-47. Its not brittle like most fiberglass resins, but still sands easy. I use 80 grit sandpaper then go right to the primer. Looks good as a finishing coat if sanded with finer increments.
Verified purchase: YesCondition: NewSold by: rchobbyexperts
by fredhh47
14 Jun, 2016
Finishing Resin for my boat project
I bought the finishing resin for my R/C boat kit project on the recommendation of the kit manufacturer. I used it on both inside and outside surfaces of the boat for sealing and waterproofing of the wood. I also used it on the inside to adhere fiberglass cloth. I liked the product for its effect, but I felt it could have been a smidgen thinner to make spreading it over large surfaces a little easier. I settled on a technique of putting some at one end of a surface and using a wide plastic putty spreader to smear it from one end to the other. It spread a long ways from a small amount applied at one end. It actually seemed to flow better after it had been "worked" a little, so overall, I didn't waste much. On the inside surfaces, which were both curved and somewhat obstructed, I used a ... I bought the finishing resin for my R/C boat kit project on the recommendation of the kit manufacturer. I used it on both inside and outside surfaces of the boat for sealing and waterproofing of the wood. I also used it on the inside to adhere fiberglass cloth. I liked the product for its effect, but I felt it could have been a smidgen thinner to make spreading it over large surfaces a little easier. I settled on a technique of putting some at one end of a surface and using a wide plastic putty spreader to smear it from one end to the other. It spread a long ways from a small amount applied at one end. It actually seemed to flow better after it had been "worked" a little, so overall, I didn't waste much. On the inside surfaces, which were both curved and somewhat obstructed, I used a paintbrush with the bristles cut to about half length to spread the resin. It did not come out as smooth as the putty-spreader method, but covered the surface. There was more buildup and some dripping due to the brush application. The working time was sufficient for doing a fairly large area. I tried thinning a small batch with Acetone, which did make it flow onto the surfaces a little easier, but it became sticky very quickly as the Acetone evaporated and seemed to take longer to set. I wouldn't recommend thinning it and would use it as is. Mixing small batches would have been easier if the bottles were marked with ounces (a fairly large amount) or milliliters (ML), more precise. I used a gram scale and was as careful as I could be with the amounts, and I still ended up with some of one part left over when I finished the other part. I don't know if the two parts weigh the same or if one is slightly heavier, or if I just needed a more accurate scale. I would buy it again and actually have done so.
Verified purchase: YesCondition: NewSold by: home-gallery
by bokebos
30 Oct, 2015
Z-POXY finishing resin. 12 ounce PT-40 size....
Z-POXY. What can I say about it? Well, for starters, I build wooden model boats, and when I have to put a layer of fibre-glas on the hull, this is the best that I've found for doing that. Also great for sealing the interior of the boat. Great price, compared to some others, and the odor is so low, one could say that it really is odorless. I've been using it for some time now, and never had a disappointment...Z-POXY. What can I say about it? Well, for starters, I build wooden model boats, and when I have to put a layer of fibre-glas on the hull, this is the best that I've found for doing that. Also great for sealing the interior of the boat. Great price, compared to some others, and the odor is so low, one could say that it really is odorless. I've been using it for some time now, and never had a disappointment...
Verified purchase: YesCondition: NewSold by: performancepc2009
by uncle.fogey
25 Mar, 2023
Great as a grain filler for pouous wood
I use it to fill the grain in guitar bodies before final finishing. because of the thickness, one coat is the same as many coats of normal sanding sealer It works very well for that, cures overnight, and can be sanded cleanly after around 8 hours for a second coat. It's easy to mix small amounts, so there is a minimum of wasted material. It darkens the wood and brings out the grain, which is good for figured wood. I believe it would also consolidate soft or punky wood I use it to fill the grain in guitar bodies before final finishing. because of the thickness, one coat is the same as many coats of normal sanding sealer It works very well for that, cures overnight, and can be sanded cleanly after around 8 hours for a second coat. It's easy to mix small amounts, so there is a minimum of wasted material. It darkens the wood and brings out the grain, which is good for figured wood. I believe it would also consolidate soft or punky wood
Verified purchase: YesCondition: NewSold by: rcsuperstore
by wassom1946
12 Apr, 2017
Right product for the Job
After reading the instructions to apply Z-epoxy finishing resin to balsa boat, I applied the resin over a layer of lite fiberglass cloth. It was easy as painting to apply. This was my first attempt a using finishing resin prior to painting. The instructions were straight forward with tips that really helped to guarantee a successful application of the resin. My boat finish really received compliments when it was shown at the club meeting. A happy user.After reading the instructions to apply Z-epoxy finishing resin to balsa boat, I applied the resin over a layer of lite fiberglass cloth. It was easy as painting to apply. This was my first attempt a using finishing resin prior to painting. The instructions were straight forward with tips that really helped to guarantee a successful application of the resin. My boat finish really received compliments when it was shown at the club meeting. A happy user.
Verified purchase: YesCondition: NewSold by: rcsuperstore

Picture 1 of 1

Z-poxy Finishing Resin (12 oz.)

Shop with confidence

Item specifics

About this product

Product Identifiers

Product Key Features

Item description from the seller

Seller business information

Hobby Titan

99.3% positive Feedback•519K items sold

Detailed seller ratings

Popular categories from this shop

Seller Feedback (200,924)

Product ratings and reviews

Most relevant reviews

Best finishing resin I have ever used.

Finishing Resin for my boat project

Z-POXY finishing resin. 12 ounce PT-40 size....

Great as a grain filler for pouous wood

Right product for the Job

More to explore:

Hobby Titan

99.3% positive Feedback•519K items sold

Detailed seller ratings

Popular categories from this shop

Seller Feedback (200,924)