Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Wah & Volume
I have always liked indestructible equipment, and that is where this pedals construction has proven itself. It is armor encased volume control at its best. Positive shut off when off and smooth transition through the volume control, easy swells and smooth under your foot. Some people don't like the string under the pedal because it will eventually break. The string and spring is an easy fix if you watch the Ernie Ball You-tube video and it is a cheap repair if you were to break one. This pedal does everything I purchased it for, I can't say that there is anything about it that needs improvement. After all these years in production, these are still being built indestructible. I like mine, I recommend one, or two, or ............
Verified purchase: Yes | Condition: Pre-owned
The pedal is great, however some will find that it does not allow you to swell the way they want. it's either too much or too little volume and the range could be better, In one example, on a recent recording I had to ditch the pedal completely and just use my volume knob to create the desired volume distrortion roll-in that i was hoping to achieve with the pedal. I think this is a good pedal for gauging your stage or room volume but for swells not so much.
Verified purchase: Yes | Condition: Pre-owned
This pedal is an industry standard and used by countless professionals live and in the studio. It enables me to practice at home w/the full potential of my guitar's volume, pedals and amp. My amp volume can be to a place where it's working better and can accept the full volume of my guitar. The volume pedal is a go-between that makes it happen at reasonable home volumes in my studio. Pedal steel effects are achieved as are tremolo. It doesn't get in the way or degrade the guitar's tone as other active pedals tend to. It takes practice to get swells sounding good and accurate. At times I find myself needing to increase or back off subtly and that takes practice to hit it right every time. The other issue w/mine is that I'd like it to sometimes be less resistant to foot/leg pressure but there are clear reasons for this (it doesn't move or drift once set). All in all I'm very satisfied w/adding this to my tool belt.Read full review
Verified purchase: Yes | Condition: Pre-owned
The Ernie Ball volume pedal is arguably the standard of the industry. Simple and refined in its design, it is a reliable and well manufactured product. The particular example that I purchased is designed for use with passive electronics. It was purchased Brand New. It came packaged in it's original celophane, and manufacturers cardboard box. The price was very good, the shipment was prompt. I highly recommend purchasing this item from this particular seller.
Verified purchase: Yes | Condition: New
This is a great value. I’ve had this same one before. Simple, does what it should. No frills. Gives you quick access to volume and ability to swell into or out of your playing. And it requires no power supply. It also has two output jacks. One, directly to tuner pedal. The other to rest of pedal chain. And it doesn’t take up too much real estate on the pedal board !!
Verified purchase: Yes | Condition: Pre-owned
This is a perfect no frills pedal. Requires no battery, just plug in line and and you have complete control of your volume at your feet leaving your hands free to play. Bump up your lead lick then back I’d down. Works great and doesn’t take a rocket scientist to hook up or figure out.
Verified purchase: Yes | Condition: New
I now have 3 of these pedals on separated pedal boards. It is very rugged and, with the active circuitry, offers clean boost, minimum volume setting, very low current draw and low impedance output. There is also a tuner output. It does not degrade the signal like passive pedals. And, it is economically priced, compared to other active pedals. I am still getting used to the taper as it is somewhat different from my Boss GT10, but works fine. I would, and have, bought again and would highly recommend it.
Pedal is constructrd solidly, does not affect tone when at full volume. When at low volumes, affects tone in same fashion as regular volume knob on guitar; cleaner at lower volumes. No leak-through; when pedal is all the way closed, zero sound escapes. NO BATTERY REQUIRED! This pedal is designed for guitars with passive electronics, they make a different pedal for guitars with active electronics. I love this pedal!
Verified purchase: Yes | Condition: New
A most excellent pedal for keyboards, great swell effects with no distortion. It seems to provide an overall better tone, than without it. I've tried several other pedals; roland, moog,yamaha , The EB is miles ahead. Great construction,you can't top quality.
Verified purchase: Yes | Condition: Pre-owned
We had tried using a standard passive 250k E.B Volume pedal for our keyboardist,But all the travel was wasted except say a 1/4in. The lower 25K impedance lets her use the whole travel of the Pedal. Plus its a little smaller in size! Great Deal too,Great Product Buy one!
Verified purchase: Yes | Condition: Pre-owned