Adaptec ASR-71605 1GB Cache 16-Port 6Gbps Raid controller Low profile Bracket

Name: Adaptec ASR-71605 1GB Cache 16-Port 6Gbps Raid controller Low profile Bracket
Brand: Adaptec
Price: 28.88 GBP
Availability: InStock
Rating: 4.75 (8 reviews)

NETWORK-SERVERS

(12136)

Business

Seller's other items

Contact seller

£28.88

or Best Offer

Condition:

Used

“Fully tested using a raid setup and under windows server 2016”

Quantity:

5 available5 sold

People are checking this out. 2 have added this to their Watchlist.

Shop with confidence

eBay Money Back Guarantee

Get the item you ordered or your money back. Learn moreeBay Money Back Guarantee - opens new window or tab

About this item

Seller assumes all responsibility for this listing.

eBay item number:365324883590

Last updated on 05 Jan, 2025 14:04:18 GMTView all revisionsView all revisions

Item specifics

Condition: Used

Seller notes: “Fully tested using a raid setup and under windows server 2016”

Non-Domestic Product: No

Brand: Adaptec

External Interfaces: RAID Cards

Type: RAID Controller Card

Custom Bundle: No

Model: ASR-71605

MPN: ASR-71605

Compatible Port: PCI Express x8

RAID Levels: 10

Modified Item: No

EAN: Does not apply

Item description from the seller

Seller business information

I certify that all my selling activities will comply with all EU laws and regulations.

VAT number: GB 726083831

I provide invoices with VAT separately displayed.

CRN: 03551393

Extended Producer Responsibility (EPR) numbers:

A seller has an EPR number if they've registered with the government as a producer of a certain type of product and taken responsibility for managing the waste that product creates.

Safety and accessibility information

About this seller

Joined Jun 2001

Usually responds within 24 hours

Registered as a business seller

Supplier of high quality of hard to source Server components,At Asdmicro.com we have been supplying Servers and Networking Products for 20yrs, from tape drive to fibre chanell Arrays to Raid ...

Visit shop Contact

Detailed seller ratings

Average for the last 12 months

Accurate description

5.0

Reasonable postage cost

5.0

Delivery time

5.0

Communication

5.0

Server psuServer SparesMemoryFiber CardsHp serversTape DrivesNetwork CardsPowersupplyFans

Seller Feedback (11,859)

This item (3)

All items (11,859)

*****- Feedback left by buyer.
Past 6 months
Verified purchase
I ordered 10x SAS 4TB drives. (Testing proved them to be perfect). However, one 3TB drive was incorrectly sent. Upon notifying seller, I was immediately sent a postage-paid return label with optional doorstep pickup, but I left it at my local PO, and got a full unit refund within 2 days. EXCELLENT SERVICE. The drives themselves were professional packed in very protective packaging which kept them isolated from each other. The appearance of the drives was scuff free, with minimal handling marks.
*****- Feedback left by buyer.
Past year
Verified purchase
Outstanding experience from start to finish! Item exactly as described, securely packaged, and shipped with lightning speed. Communication was clear and friendly—truly a credit to the eBay community. I couldn’t be happier with this purchase. Highly recommended seller—would gladly buy from again without hesitation! ⭐ A+++
*****- Feedback left by buyer.
Past 6 months
Verified purchase
Arrived quickly, well packaged and exactly as described. Highly recommended seller, wouldn't hesitate to buy from again.

See all Feedback

Product ratings and reviews

Learn more

4.8

8 product ratings

6 users rated this 5 out of 5 stars
2 users rated this 4 out of 5 stars
0 users rated this 3 out of 5 stars
0 users rated this 2 out of 5 stars
0 users rated this 1 out of 5 stars

Would recommend

Good value

Good quality

Most relevant reviews

See all 8 reviews

by aaronmdjones
04 Dec, 2020
A fantastic, fast HBA, but read the whole review for some requirements & gotchas
At first I was only getting ~800kB/s through this card. After some troubleshooting, reseating the SAS connectors, changing kernel versions, etc. the situation did not consistently improve. At this point I removed the card from the PCIe slot and noticed that, compared to a USB 3.0 PCIe card I happened to have right next to me out of sheer luck, the PCI bracket was mounted on the wrong side of the PCB. This was preventing the card from going all the way into the PCIe slot. After correcting that I am getting full speed to all drives on all ports simultaneously. It must have been a bad PCIe electrical connection. On to the details! You MUST ensure adequate airflow! The PCB has "THIS CARD NEEDS 200LFM AIRFLOW" printed on the silkscreen, and I don't doubt it. As I'm using this in an ATX ... At first I was only getting ~800kB/s through this card. After some troubleshooting, reseating the SAS connectors, changing kernel versions, etc. the situation did not consistently improve. At this point I removed the card from the PCIe slot and noticed that, compared to a USB 3.0 PCIe card I happened to have right next to me out of sheer luck, the PCI bracket was mounted on the wrong side of the PCB. This was preventing the card from going all the way into the PCIe slot. After correcting that I am getting full speed to all drives on all ports simultaneously. It must have been a bad PCIe electrical connection. On to the details! You MUST ensure adequate airflow! The PCB has "THIS CARD NEEDS 200LFM AIRFLOW" printed on the silkscreen, and I don't doubt it. As I'm using this in an ATX tower, and my side panel does not have a fan mounting position, I mounted a 120mm fan onto the inside of it instead, and built a cardboard shroud around it with some duct tape. It's a bit ghetto, but it works, keeping the card under 55 Celsius. Ensure you set a fan failure alarm on your motherboard header! See the pictures attached to this review for more details. One thing I wish this card had is an array of headers for hard-drive activity LEDs. Now that I'm not using any of the SATA ports on my motherboard, the HDD LED header on the motherboard will never activate, and so I've moved the chassis HDD LED connector to the card's ALARM header. I would have preferred if there were individual headers for each drive (or at least each SFF-8643 connector), and a master header for all drives, so that I could connect the chassis HDD LED to the latter. This is a very minor quibble though. Note that the ALARM header outputs a constant 3.3V on one pin, and has a 2kHz open collector on the other pin (as per Adaptec's installation manual), so this is suitable for driving most chassis LEDs, as the ATX motherboard specification calls for 3.3V LEDs too, and most LEDs will not mind being turned on and off 2,000 times per second. Activating the alarm test functionality with ARCCONF does illuminate my LED. I recommend staying out of the UEFI HII administrative interface on this card. Even after I put the card in HBA mode and powered off, and then connected my hard-drives, upon entering the interface again to confirm it detected all of them (which it did), I booted my operating system to discover that the drives had had their partition tables wiped. This was not an immediate concern, because I use GPT, which places a backup copy of the table at the end of the drive, and I don't create partitions that occupy the whole drive -- I leave 128 MiB of unallocated (non-partitioned) space at the beginning and end of drives, for precisely this sort of reason. I've had all sorts of drive corruption issues with controllers and operating system installers (I'm looking at you, Windows) over the years that have taught me this lesson the hard way. Always partition (even if it's only going to be 1 partition), and always leave a large gap around them. Anyway, while the Linux kernel will only read the primary GPT at the start of the drive (which was now missing), gdisk(8) (from GPTFDISK) can restore this backup partition table (at the end of the drive) for you automatically, so I was back in business straight away. Stick to the ARCCONF command-line utility for querying and configuring it; this has not happened again (even after connecting more drives) since I did that. Also note that if you want to use ARCCONF under Linux, you will *need* to disable "CONFIG_HARDENED_USERCOPY_PAGESPAN" in your kernel. You can have the regular hardened usercopy option enabled, but the _PAGESPAN sub-option makes ARCCONF segfault. Overall this is a fantastic card (especially for this price; £42!), with a few warts but no show-stopping gotchas. It will easily talk to 16 hard-drives simultaneously, without any observable bottlenecks. Note that I have not tested the BIOS boot functionality (as I have a UEFI machine with the CSM disabled). Nor have I tested any SAS expanders, though it does claim compatibility for up to 255 hard-drives if you choose to do so. Finally, I have not tested hardware RAID mode, as I use Linux mdraid and so put the card into HBA mode.
Verified purchase: YesCondition: Pre-ownedSold by: hbr2015
by wiluk_vryqe
14 Apr, 2024
Good card just remember to keep cool
Great wee card, but blooming heck it gets hot, needs really good ventilation and airflow… Apart from that it’s very good… Get a small fan (I use noctua) and screw in to heatsink fins and is great…
Verified purchase: YesCondition: Pre-ownedSold by: network-servers
by kerppa77
31 May, 2021
A great card for the multiple drives raid setups
Just what I waited. Ability to mount several sata drives via miniSAS HD ports.
Verified purchase: YesCondition: Pre-ownedSold by: itinstock
by tim.shippam
10 Apr, 2024
Look's brand new does the job I brought it for! Thank you!
Look's brand new does the job I brought it for! Thank you!
Verified purchase: YesCondition: NewSold by: pcbuyit
by kx3210
08 Dec, 2021
Good product
Worked without problem
Verified purchase: YesCondition: Pre-ownedSold by: network-servers