Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Sync Cords
This lead, being a plug in and go replacement to fit the Metz 45 CL4 is invaluable. It means that with one of these in your gadget bag your flash will not be disabled by the lead going open circuit. One problem is the lack of quality control with Indian manufacture, but these leads, on test, worked perfectly. Interchangeability of parts is one of the reasons I like Metz kit so much. Replacement leads, drop out battery packs for when your battery runs low, clip on wide angle beam modifiers all extent the usefulness of your flash. I recommend having one or two in reserve.
Verified purchase: Yes | Condition: New
This is a heavy duty construction and it looks it; with a useful expanding coil in the middle, giving it a useful full length if needed; it's a pity that Metz did not make one like it in the first place as the one provided with the flash gun fractured internally after some use and was also was very short, allowing flash on camera use only. Both plugs fit securely also.
Verified purchase: Yes | Condition: New
This product is very well made, with chunky connectors that are strongly attached to a thick cable. The multi-pin connector and the pc-sync coaxial connector both fit tightly and positively (to a Metz 45 CL-4 and to a camera pc-sync port respectively). This Sonia-branded cable was bought to replace a failed Metz-branded item – in comparison, the Sonia cable is much better quality. Highly recommended.
Verified purchase: Yes | Condition: New
This cable, which had been hard to track down, is the perfect compliment to my Metz 32 CT-4 flashgun with its non-dedicated module combined with the G 15 power grip. Even though it is pre-used I found that it worked perfectly.
Verified purchase: Yes | Condition: New
I had no end of trouble with the Metz cable It was very hit and miss The Sonia version is way better now i can use my old flash again
Verified purchase: Yes | Condition: New