Replacing an OEM rack on my CB125f in order to fit a larger box, I realised that it was lopsided wrt the bike. It had been fabricated assymetrically and required the addition of around 5mm of spacers under each end of the mounting plate between the rack and bike frame on one side to bring it level. As it includes bolt holes for Givi side pannier frames which I was planning to fit next, I now wonder if the hole is actually in the right position on the side where I had to fit the spacers. I'd have returned it but needed the bike and the box quickly.
Verified purchase: Yes | Condition: New
Well firstly the finish on the rack is perfect, the feel of quality is brilliant, its much heavier than i thought, but fitting it is not for an amateur, I found that 3 of the four bolts slide in perfectly but the 4th hole is misaligned & the bolt will not fit, even if you fit the 2 bolts on the other side first the last one will not go in, i have mine held on just using 3 bolts for the moment & although its strongly fixed i intend to widen the fourth hole to get the fourth bolt in,(they wouldn't supply 4 bolts if you only need 3). So in summary yes i would recommend it but you might need help to fit it,
Verified purchase: Yes | Condition: New
The holes did not line up properly and I needed to put some considerable time ans force into bending it so that all the holes lined up. I left all of the bolts loose while I tried to line up the holes but the last hole still did not properly line up with the hole being half a hole width out of alignment. I did eventually get all the bolts on but only after considerable time trying different patterns of bolts until they just about lined up. If you have the time and patience like I did then it is an ok product but I expected a higher quality of manufacturing for the price.
Verified purchase: Yes | Condition: New
The rack is good quality But you cannot get the screws to fit right Had a hell of a job fitting it. The rack didn’t line up right with the holes on the bike. The rack is only holding on with 2 screws has got to make the holes bigger on rack.
Verified purchase: Yes | Condition: New
Gave 2stars because the holes did not line up with the cb125f framework. Had to enlarge holes by5mm and still had to prise it wider to get bolts in. And a 5 min job took 2hours. Feedback: Manufacturer needs to do some quality control.
Verified purchase: Yes | Condition: New
Sturdy. Attached with no problems - relatively straightforward.
Verified purchase: Yes | Condition: New
kooks good quality when fitted on bike
Verified purchase: Yes | Condition: New
Perfect A+++
Verified purchase: Yes | Condition: Pre-owned
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Luggage Racks
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Luggage Racks