Does exactly what is meant to and easy to install . However we found some of the nozzles had different holes which lead to some inconsistent flow . Also tricky if you have short pipes close to the unit as well as long ones to ensure consistent pressure . We found superglue was useful with loose fitting near the unit .
Verified purchase: Yes | Condition: New
The packs were all slightly different, with the worst part being the difference of the internal size of the pipes, one of them was extremely difficult to attach the fittings to. One set of fittings had waste material from the moulding that I had to manually remove to be able to use them. If you planning on watering more than a few plants this set doesn’t really suffice, due to the volume of water that can pass through it and no restrictors to slow flow at the start it’s quite difficult to get and even amount of water to each plant, I had to tie wrap pipes or knot the pipes to restrict flow at the start to get any flow at the end. I was hoping to water my whole veg patch with this, which is pretty small, for whilst I’m away on holiday but to get enough flow I’ve had to pipe four separate systems, so I’m hoping to make an adapter at work so all four can connect to my outdoor tap at the same time, luckily I can do this, others may not be able to. If anyone does use it I recommend creating a complex pipe system where you make a ring connecting back to itself with legs coming off just to water a few plants, simply laying the pipe from the hose connector and taking a leg off at a time for your plants will end up with the first plant being drowned and the last plant getting nothing. Overall I think I may have just done enough to get me by for this holiday but next time I will invest in something a bit more appropriate for the task Read full review
Verified purchase: Yes | Condition: New
If I wasn't involved in plumbing etc it would have been difficult to make this watertight. The feed pipe needs epoxy resin sealing to the tap connector as it is a push fit and does not seal. The pipework needs a hot air gun to soften it, using a cup of hot water would take all day to install. However the quantity of pieces and length of pipe is excellent for the price - I have fitted it to our greenhouse and the feed system works fine, it is fitted to a timer so we can go away and not worry about watering. We are now going to install it in the outside garden so we can forget about the watering.
Verified purchase: Yes | Condition: New
Its a nice system easy to set up took me 4hrs due to needing to set up 4 kits as have a big veg patch My only real gripe is not enough drippers i had 80 between the 4 kits and i need another 80 to water everything plus the water filter mesh and plastic flow cap dont really leave much thread to go onto a tap, hence i had to leave them out as im using a 4 way spliter On a plus just 1 hour of drip water kept my plants watered for a day or 2 insteadof watering 2-3times a day with a hosepipe One last thing if you measure out the lenght of runs and main lines what ever number of kits you decide to order, order 1 more so you have more drippers and spare hose
Verified purchase: Yes | Condition: New
Would have liked to be able to have a few more choices to the above questions rather than just a plain 'Yes' or 'No' answer! We have mixed feelings about this. In principal it was what we wanted for our poly tunnel. However, you can't regulate the flow of water coming out of the end pieces and we found some just dripped and some just spurted out giving an uneven amount of water between pots. Bit disappointed, ended up buying some end pieces that we could do this with (from a completely different system) and used in conjunction with this. Probably our fault we should have done a bit more research first.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Drip Irrigation Kits
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Drip Irrigation Kits