Really good quality connector with a useful length of cable that you can cut down to your needs. Bullet connectors are provided for those who don't want to solder and heat-shrink the wires themselves. Absolute bargain for the price and no reason to believe that it won't last for a good number of years.
Verified purchase: Yes | Condition: New
If like me you decide to change your own Audi TT discs and pads to save £300 on just the front axle, then can't remove the brake pad wear indicator connection from the loom side it plugs into and it snaps off 😩, don't dispair as this £6.99 item from H2F will fix your problem very easily. Either cut the wiring and use the supplied crimps, or like it did, pull the old and new connection apart and simply replace the broken male plastic housing, it's just like it was originally.....👍
Verified purchase: Yes | Condition: New
Original male connector for brake wear indicator had been broken by garage when they fitted a new n/s front suspension spring. I had managed to bodge a temporary repair but this new connector, complete with 30cm lengths of attached leads, boot and sheath allowed for a much more professional and permanent repair. Of course I didn't actually require the full 30cm of the leads but shortened these appropriately prior to splicing them onto the trimmed original wires. Perfect!
Verified purchase: Yes | Condition: New
At last years mot my vw t5 failed on the lack of brake wear wire connection. There was no light on the dash as the previous owner had soldered the ends together and tucked them up inside the wheel arch. So, as a good and responsible person I duely reconnected the wires and replaced the pads to make it all work! Or so I thought! Within a month of getting it all sorted, the warning light started coming on. I checked all the connections and all fine. Eventually I realised that the wire to the pad had snapped up inside the loom. After several hours of working my way up the loom I found the break. Having bought this part it was easy enough to splice in the new end and tape it all up. Thanks for the part. Did the job well. (VW are expecting a lot from that wee wire!)
Verified purchase: Yes | Condition: New
Sensor was easy to wire up, plug was a little bit of a tight fit, but once on it formed a good connection.. dash brake pad warning light now off.. job done!!
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Wiring Harnesses, Cables & Connectors
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Wiring Harnesses, Cables & Connectors