CURRENTLY SOLD OUT

NuTone Heater Motor Assembly (S97017648)

About this product

Product Identifiers

BrandNuTone
MPNS97017648
UPC0026715178810
ModelS97017648
eBay Product ID (ePID)1001493619

Product Key Features

Year Manufactured2008
Number of Speeds1
ColorSilver
Voltage120 V
RoomBathroom
MaterialMetal
TypeHeater Motor Assembly

Ratings and reviews

4.4
31 product ratings
  • 20 users rated this 5 out of 5 stars
  • 7 users rated this 4 out of 5 stars
  • 2 users rated this 3 out of 5 stars
  • 1 users rated this 2 out of 5 stars
  • 1 users rated this 1 out of 5 stars

Would recommend

Good value

Good quality

Most relevant reviews

  • Most favourable review

    This replacement part fits the discontinued "old" environment perfectly

    I pretty disappointed that I could find the exact replacement part for my heater/fan. I had read that the Broan Nutone S97017648 Heater Assembly has a suitable substitute, but I had my doubts. After searching and searching for the exact replacement part -- and not being able to find it -- I took the risk of ordering the S97017648 here in eBay, and hoping for the best. I delighted to report that the S97017648 fit PERFECTLY, and works PERFECTLY. I treat pretty much everything that I read on the internet with a healthy dose of skepticism, but in this case, the internet and the Bay seller were quite right. This part was just what I needed, and at a fair price.

    Verified purchase: YesCondition: Pre-owned

  • Most critical review

    Loud, but not Proud

    As several buyers of this replacement heater/fan assembly (different from original design) have previously stated, it is MUCH louder and seems to produce less heat output than the original assembly. Having 3 total of these heater/venting fans in the house, I just exchanged this new unit into the guest bath unit (which is not used nearly as much) and put the removed guest unit in the master bath which had originally failed.

    Verified purchase: YesCondition: New

  • Easy direct replacement

    This heater is an easy to install direct replacement. Just slide the tab into the existing housing, put in the one screw and plug it in. Couldn't be much easier without someone doing it for you. This model has the resetting thermocouple, so you don't have to worry about overheating anymore. It took less than 10 minutes for me to take out the old one and install this heater in the kid's bathroom.

    Verified purchase: YesCondition: New

  • A model replacement for our original heater, but very noisy.

    This is a replacement part for our original heater. Before we had to replace the heater about every 2 years in our bathroom. This is a different replacement type that seems to be longer since it has been at least two years since replacing the last one. Only complaint is it is very noisy, alot louder than the original type. If you don't want a noisy heater i would suggest something else.

    Verified purchase: YesCondition: New

  • There may be better choices out there.

    This product did replace the broken heater element and motor in our overhead bathroom fan. It appeared to come in a box that had been opened before. The unit was not a perfect fit, but I was able to make it fit. The problem may not have been with this unit but with the original unit the device goes into. Lastly, it's kind of noisy. On the other hand, it was $10 cheaper than any other of the same part I could find. And it does deliver heat.

    Verified purchase: YesCondition: New

  • Bent and warm

    The fan/heater box came crushed and I was going to send it back! After opening and inspecting the unit I was able to bend the edges and frame ends back straight. Hoping that it would fit. Finally got it in the slot. From there installation went well. Once hooked up, tested the unit. The heater worked ok, not as hot as the original. Hopefully lasts longer than the original.

    Verified purchase: YesCondition: New

  • Heat not hot

    Replaced this part which burned out. This one is ame model number but configured differently than the one we had to replace. However, it did fit into the exiting fixture. The heat is just not as high as the previous heater unit (maybe that;s why they burned out so much!)

    Verified purchase: YesCondition: New

  • Works well

    Not the same as original, had to take ground wire from old unit and mount to replacement. The heater works well.

    Verified purchase: YesCondition: New

  • It works.

    This part had to have extra holes drilled to be more supportive, but so far it works.

    Verified purchase: YesCondition: Pre-owned

  • Quick fix

    The right product on this fix. Slip it in, tighten the screw, plug it in, flip that switch and it worked!

    Verified purchase: YesCondition: New

More items related to this product