CURRENTLY SOLD OUT
About this product
Product Identifiers
BrandBosch
MPNBME280
eBay Product ID (ePID)10016234941
Product Key Features
Output TypeDigital
Minimum Breakdown Voltage2.8 V
Number of Pins4
Maximum Operating Temperature85 °C
Mounting StyleSurface Mount
Minimum Operating Temperature-40 °C
TypeTemperature Sensor IC
Dimensions
Item HeightSurface Mount
Ratings and Reviews
Most relevant reviews
- 27 Jan, 2021
Small, lightweight, 5v, I2C device with three detectors.
The BME offers temperature, humidity and air pressure. This one is the 5 volt, I2C model. I have blown up a number of the 3.3v models by connecting them to an Arduino without a resistor! Much easier to buy the right model in the first place. I use this for an environment detector for my observatory. The I2C bus is an easy way of linking up to 255 devices and of course this is 3-in-1. Recommended.Verified purchase: YesCondition: New
- 07 Sep, 2020
Work well with ESP32
I bought two of these on different occasions. Running both within inches of each other using ESP32 MCUs to read them, shows that they are consistent for pressure (0.04%) and temperature (0.2%). Humidity is not so consistent (3.5%) The high reading device is high for all measurements. Close to measurements taken with analogue thermometer and barometer. Good enough for a weather station.Verified purchase: YesCondition: New
- 28 Oct, 2020
Flexibile design.
This module has an on board 3.3 volt voltage regulator and logic level converter. This means it can be powered from 5 volts and work with logic levels of either 3.3 or 5 volts. The only possible problem with this is these components will generate a small amount of heat which will probably cause it to read a slightly higher temperature than the air temperature. Les.Verified purchase: YesCondition: New
- 27 Jan, 2021
Works fine but you need the right software
I bought this expecting it to work out the box with either pimoroni or adafruit software but could not get them to work. However a module developed by Matt Hawkins ( search git hub) works fine. A great addition to my weather stationVerified purchase: YesCondition: New
- 19 Apr, 2018
Nice little device
Great product, easy to program using Ardunio, readings seem reasonably accurate.Verified purchase: YesCondition: New
- 20 Jan, 2021
Cheap weather station
Cheaper than the Pimorini equivalent, but just as effective. Using mine on a Pi Zero to remotely monitor temperature in another room.Verified purchase: YesCondition: New
- 05 Sep, 2018
Great I2C sensor
Works great for my ESP32 based weather station projectVerified purchase: YesCondition: New
- 26 Jan, 2021
Excellent
Good product, good priceVerified purchase: YesCondition: New
- 28 Oct, 2020
BME280
A good product at a reasonable price and delivered in a timely fashion.Verified purchase: YesCondition: New
- 13 Nov, 2020
Excellent item
Great little boardVerified purchase: YesCondition: New
