Picture 1 of 1
Picture 1 of 1
IRWIN Record Rw58 Quick Wrench 57mm Cap 10503642
PCArena-Bristol (504637)
98.6% positive Feedback
Price:
£96.59
Free postage
Returns:
30 days return. Buyer pays for return postage. If you use an eBay delivery label, it will be deducted from your refund amount.
Condition:
Jaw Capacity 58mm. A multi-purpose pipe wrench suitable for all manner of applications in the plumbing and heating industry. Sintered high carbon steel upper jaw with hardened serrated steel jaw teeth and a strong aluminium sliding body.
- Buy it nowIRWIN 10503642 Record RW58 Quick Wrench 3-58mm Capacity
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
About this product
Product Identifiers
BrandIRWIN
GTIN5706915036428
UPC5706915036428
eBay Product ID (ePID)1005674931
Product Key Features
Tool Sub-TypePlier Sets
Tool TypeWrenches
Dimensions
Depth3cm
Height40cm
Width8cm
All listings for this product
Safety information
Ratings and reviews
Most relevant reviews
- 19 Feb, 2019
easy to use tool!!
Great tool will help a lotVerified purchase: YesCondition: New
- 09 Aug, 2018
Hello i am from Azerbaijan
The product is very comfortable to use.Verified purchase: YesCondition: New
- 28 Apr, 2016
Good Idea - but not quite Carlsberg
The device is supposed to be a one-press to attachment/release pump wrench. However, my feeling I that it doesn't entirely achieve that design objective. Pros Short shank and relatively small head/jaws means it can get into relatively small spaces. Relatively light weight compared with the competition Cons Although I haven't used it on a pump (Attempted to use it on difficult to reach/see pipe connections), my feeling is that there isn't sufficient throw on the shank to give the torque to release a well-set 50mm and above pump ring nut Also, when using it on a lesser application, I found that the shuttle jaw mechanism could occasionally skip teeth on the rack, causing the grip to loosen. The quick-release shuttle mechanism worked best with the jaws set at the widest opening range. When the jaw opening was set on a narrower gap, even with the quick-release button fully depressed, the shuttle mechanism tended to clip the teeth of the rack when being moved - not good when you're trying to apply the tool in a difficult to reach/see situation because resistance to movement of the jaws maybe the only indication the workman gets that the tool is gripping properly - there were some occasions when I went to turn the wrench only to find that I'd got a "False positive" and that the jaws weren't completely closed round the object that needed turning. I think the problem here lies with the fact that the quick-release button also serves as the mechanism to propel/withdraw the shuttle mechanism and the extra pressure on the QR button necessary to cause the shuttle to close or open the jaws causes the shuttle to pitch either slightly forward or backward leading to "Clipping" of the teeth on the rack. IMHO the handle needs to be mildly soft-grip, with limited movement both up and down the shank and with a narrow arc of range of movement to each side of the "Vertical" of the shank. A slot in the shank (At the handle end) and some sort of lock-off mechanism might be useful. Further, the quick release mechanism and the shuttle running gear need to be modified to prevent clipping of the teeth. Perhaps the dual function QR button needs to dispensed with and replaced by a wheeled shuttle with a button which when released engaged and locked a pinion/dog clutch in the rack .To facilitate this, perhaps the rack teeth need to be position on the wider profile of the shank (Maybe, on both opposite sides). That way, "False positives" for effective engagement of the tool would be avoided and shuttle movement when "Sizing" the jaws would be free of impediment. That said, my observations come from my attempt to use this tool for a purpose for which it wasn't really designed i.e. an old-fashioned ring nut on a kitchen sink waste. NickVerified purchase: YesCondition: New
