good structure but needs a bit of do it yourself.
The overall design is good and easy to assemble just follow the plan, the bolt holes and fixings are accurately manufactured.
The uprights (legs) are a good design and are of strong steel section.
The crossbar is equally of good design and section.
The joining box sections are OK, you need a hand to assemble.
The seat is no so good, you will find the arm rests and hanger sections are good but the base frame of the seat is to weak, the steel box section frame is to light and needs to be strengthened ie: on my initial assembly with everything done and ready for a relaxing time my wife and daughter sat on it and after about 5 minutes I noticed the cushions seemed to be sagging further investigations showed the box section had bent.
The company provided another seat base and l strengthened the box section leading edge by pop riveting a 1500x20x3mm steel flat bar at 150mm centres along it,s face.
Next I purchased a 1500x550x10mm thick ply board and screwed it to the top of the base to distribute the seating load.
After these modifications the swing looks and works as it should with no problems.
The cushions finish of the overall appearance.
You obviously need to remove the cushions and store for weather.
Sorry if it,s a bit technical. (Ex engineer)
Verified purchase: YesCondition: New