CURRENTLY SOLD OUT
About this product
Product Information
This professional MIG welder comes equipped with two tips of 0.9 millimetres, a chipping hammer (alongside a wire brush), a spare torch shroud, a face shield, and a miniature spool of flux-coated MIG wire. It can function between 30 and 135 amperes. Overload protection is included as a standard option and it is cooled with a built-in fan. This single-phase model requires 230 volts to function.Product Identifiers
BrandWolf
MPN102748
GTIN5060255485217
UPC5060255485217
eBay Product ID (ePID)1012726046
Product Key Features
FeedAutomatic Feed
FeaturesGasless, With Gas
Welded MaterialSteel
Welding ProcessMIG
Item TypeMIG Welder
Model140x
Ratings and reviews
Most relevant reviews
- 05 Jul, 2016
Wolf MIG 140
GREAT WELD SET - OUTSTANDING VALUE, first time use of a DC welder, easy to set up, good results. Used in conjunction with Hobbyweld 5% Argon/CO2 mix to build a chassis for a DIY caravan, better weld quality compared to CO2. Gas set to 10/12 lpm. Wire feed is smooth, spatter is easy to scrape off shroud. Gets warm on higher power settings and thermal trip operates - good excuse to stop for a coffee. Did most of the welding on power setting 4 and didn't trip once. I wired my set via a 32 amp extension lead to a 32 amp socket in my shed - no sense putting a weld set on a 13 amp plug because the fuse will get hot at higher powers and extended use.Verified purchase: YesCondition: New
- 28 Feb, 2018
Wolf Mig 140
This is a lightweight mig/mag welding machine, ideal for DIY welding jobs on material up to 5 / 6 mm thick. The fact that it has a fan cooling the machine gives it a better duty cycle compared to sets that do not have a cooling fan. I am using it with .6mm wire because I find it give better penetration. If I am working on larger jobs I would use a set designed for bigger amps. over a longer period but the little wolf is great for those smaller jobs.Verified purchase: YesCondition: New
- 04 Oct, 2016
Excellent machine
Brought this to do some welding on the chassis of my land rover. It was easy to set up and use. Having very little welding experience and never used a mig welder befor i found it very good to use even in tight spaces under the discovery was much easier to use then my old arc welder. Overall im very happy with it and have now started building a roof rack for the discovery again using this machine. If i had to pick a fault it would be the mask that comes with the set. Its useless in all honesty. I brought an auto dimming jobby for around £20 of here was worth every penny. But i carnt pick fault with the machine itself.Verified purchase: YesCondition: New
- 16 Feb, 2017
Very good for price
Being used to using professional welders, this one is very good for the price. I have only used it on the no gas at the moment, but it runs very smooth and welds well as long as you don't want to go too thick. Would definitely recommend this welder.Verified purchase: YesCondition: New
- 22 Feb, 2017
Hobby welder
Very quick delivery. A good welder for hobby-type jobs. I find the lower power settings are too low to be of much use. The wire brush and mask aren't worth bothering with - very insubstantial, more of a gimmick than for proper use. Overall though, it's a good price for a good tool.Verified purchase: YesCondition: New
- 27 Sep, 2016
a1 product
excellent value for money ,superb performance all round,smooth and easy to use,been welding for 35years and would recommend this for the beginner to the experienced,,WOLF products at their bestVerified purchase: YesCondition: New
- 13 May, 2020
Wolf 140 mig
Im not a welder I have barely used mig before being more used to gas and stick welding.It works fine as far as I can tell . Seems to make all the right noises came well packed with just about every thing you need to start making sparks and smoke . The mask is pretty lame but thats about par gor the course here and auto darkening helmets are cheap enough these days and make it so much easier . All in all after having used this welder and played with jt for a while I would buy it again if I needed another one .Verified purchase: YesCondition: New
- 25 Jun, 2016
You get what you pay for and a bit more!!!!!
First one arrived, wire feed didn't work. They sent new new board. Wrong board. They sent right board. Still didn't work. I returned it and after a reminder phone call they sent replacement which seems to work well. Though I've had a bad experience, contact with this company was, though a bit one sided, very good and eventually got a good result. For the price I won't complain and I'd use them again. I liked that I felt that I was dealing with a company on a personal level rather than being stuck in a corporate system.Verified purchase: YesCondition: New
- 11 Mar, 2020
not a bad piece of kit
A bit of a faffle assembling it and the gas bottle holder is patrhetic but it gives good welding results and is a doddle to use. All in all not a bad piece of kit and there are a lot worse out there that cost a lot more..Verified purchase: YesCondition: New
- 13 Jul, 2016
good gasless mig welder
Better welder than I expected, Buy an argon cylinder if you want to use gas, The small cans are virtually useless and unbelievably expensive. Sellers are very helpful and I thank them for their helpVerified purchase: YesCondition: New
