Dewey Decimal620.1
Table Of ContentPreface ix Introduction xi ADVANCED COATING CHARCTERIZATION METHODSAND NON-DESTRUCTIVE EVALUATION Monitoring Delamination of Thermal Barrier Coatings during Interrupted High-Heat-Flux Laser Testing using Upconversion Luminescence Imaging 3 Jeffrey I. Eldridge and Dongming Zhu, and Douglas E. Wolfe Thermal Imaging Measurement Accuracy for Thermal Properties of Thermal Barrier Coatings 15 J. G. Sun ADVANCED COATING PROCESSING AND NANOSTRUCTURED COATING SYSTEMS High Velocity Suspension Flame Sprayed (HVSFS) Hydroxyapatite Coatings for Biomedical Applications 25 N. Stiegler, R. Gadow, and A. Killinger COATINGS TO RESIST WEAR, EROSION, AND TRIBOLOGICAL LOADINGS Ceramic/Metal-Polymer Multilayered Coatings for Tribological Applications Under Dry Sliding Conditions 39 A. Rempp, M. Widmann, P. Guth, A. Killinger, and R. Gadow Application of HVOF for High Performance Cylinder Liner Coatings 51 A. Manzat, A. Killinger, and R. Gadow Multilayer Coatings for Anti-Corrosion Applications 59 L. Lin, C. Qu, R. Kasica, Q. Fang, R. E. Miller, E. Pierce, E. Mccarty, J. H. Fan, D. D. Edwards, G. Wynick, and X. W. Wang ENVIRONMENTAL BARRIER COATINGS FOR TURBINE ENGINES AND EXTREME ENVIRONMENTS Plasma Spray-Physical Vapor Deposition (PS-PVD) of Ceramics for Protective Coatings 73 B. J. Harder and D. Zhu An Yb2Si2O7 Oxidation Resistance Coating for C/C Composites by Supersonic Plasma Spray 85 Lingjun Guo, Minna Han, Hejun Li, Kezhi Li, and Qiangang Fu FUNCTIONALLY GRADED COATINGS AND INTERFACES Development of Oxide Ceramic APS Coatings for Microwave Absorption 93 M. Floristän, P. Müller, A. Gebhardt, A. Killinger, R. Gadow, A. Cardella, and C. Li THERMAL BARRIER COATINGS Hot Corrosion of Potential Thermal Barrier Coating Material (Sm1-xYbx)2Zr2O7 by V205 and Na2SO4 109 Jia-Hu Ouyang, Sa Li, Zhan-Guo Liu, and Yu Zhou Variation of Creep Properties and Interfacial Roughness in Thermal Barrier Coating Systems 129 P. Seiler, M. Baker, and J. Rosier MATERIALS FOR EXTREME ENVIRONMENTS: ULTRA HIGH TEMPERATURE CERAMICS (UHTCS) AND NANOLAMINATED TERNARY CARBIDES AND NITRIDES (MAX PHASES) Temperature and Strain-Rate Dependent Plasticity of ZrB2 Composites from Hardness Measurements 139 J. Wang, F. Giuliani, and L.J. Vandeperre Nano-Crystalline Ultra High Temperature HfB2 and HfC Powders and Coatings Using a Sol-Gel Approach 151 S. Venugopal, A. Paul, B. Vaidhyanathan, J. Binner, A. Heaton, and P. Brown Pressureless Sintering and Hot-Pressing of Ti2AIN Powders Obtained by SHS Process 161 L. Chlubny, J. Lis, M. M. Bucko, and D. Kata Diffraction Study of Self-Recovery in Decomposed AI2Ti05 during Vacuum Annealing 169 I. M. Low and W. K. Pang Kinetics of Phase Decomposition in Ti4AIN3 and Ti2AIN--A Comparative Diffraction Study 177 W. K. Pang, R. I. Smith, V. K. Peterson, and I. M. Low Author Index 187
SynopsisThis book is a collection of papers from The American Ceramic Societys 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011., This book is a collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Advanced Ceramic Coatings for Structural, Environmental, and Functional Applications and Materials for Extreme Environments symposia on topics such as Coatings to Resist Wear, Erosion and Tribological Loadings; Environmental Barrier Coatings; Functionally Graded Coatings and Interfaces; Thermal Barrier Coatings; and Ultrahigh Temperature Ceramics and Nanolaminated Ternary Carbides and Nitrides (MAX Phases).
LC Classification NumberTS695