Handy little tool, took some getting used too, I watched some YouTube demonstrations first - quite useful - only thing I could not find was "What exactly is a guide plate" some demonstrations used them? I used the tool in my angle grinder, I think a 10mm would have been better but I had 2 walls one with an 8mm mortar strip and one with 100mm so I went for the 8mm, it did tend to wander a bit but I managed OK. Start by drilling a hole (in my case 8mm) to start from, I found the rake worked better and was easier to "steer" if I cut at an angle rather than straight, the mortar does not fly everywhere like with a disk but it probably takes longer. I would advise wearing safety goggles and a dust filter to remove mortar with any power tool. Really pleased would recommend. - still has a lot of life in it too.Read full review
Verified purchase: Yes | Condition: New
The abrasive detached from the end of the tool after first use (about 10 metres of Mortar). Cheap and cheerful product, about what you would expect from Silverline.
Verified purchase: Yes | Condition: New
It’s a good idea but it’s a lot quicker with a angle grinder
Verified purchase: Yes | Condition: New
Worth paying a little bit more and getting from Screwfix, they lasted a lot longer!
Verified purchase: Yes | Condition: New
great product. saves a lot of time. use half when that wears down cut of with a hacksaw then use the other half. [ great ]
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Grinder Blades/Discs
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Grinder Blades/Discs