RC kit, some assembly (and adjustments) required.
Some of the design decisions I question.
1.) Why the rear wheels are toed in?
2.) Why the ESC is mounted on the battery cover? I moved it next to the receiver. The components are small enough to fit together.
3.) Why the steering servo fits so tight up against the chassis and the instructions want you to maneuver the servo wires around it. Be better off using a low profile servo.
4.) Steering has shown me it steers really far to the right and just enough to the left. The ratio between both left and right seem to be off.
5.) Why, oh why, the upper front suspension linkage is such a mess. I missed the tiny blip of the instructions to cut 2mm off each connector piece. Which was fine, my fault. After cutting the plastic that goes on the rod, it still did not line the wheel straight. The rod was too long, yes I did use the correct one. I also had to cut the rod down further just to get the camber straight.
Other than that, just another RC kit.
Verified purchase: YesCondition: New