 |
Both the three pin and the two pin power leads are are a good quality product. They are clearly and correctly listed as being fitted with a 2 amp fuse. This fuse is correct if the power leads are going to be used for powering a standard 4 watt 40 channel radio. However, if the intended use is going to be to power one of the 'multimode' type radios that have a higher power output, then a higher rated fuse will need to be obtained separately and fitted. Follow the the particular radio manufacturers instructions as to the fuse rating required and always use a 'fast blow' type. The above advice is probably obvious to most buyers of this product, but I would advise the seller to perhaps make this clearer in the listing to avoid any confusion for less knowledgeable buyers.
Verified purchase: Yes | Condition: New
The build quality is good. The price for what you get is very good. I used it on an old CB set and the plug fitted first time. The power cable is more than adequate for the 13.8 vdc current. In my case I was drawing about 5 amps and had no problems. I suspect the current could go higher. I am please with what I got.
Verified purchase: Yes | Condition: New
This CB Radio power lead is long and with thick wire (Red and Black cables) plus reusable fuse holder in-line on the Red cable. I would recommend this power lead to anyone with a CB/type radio.
Verified purchase: Yes | Condition: New
Very good quality but the supplied 2amp fuse has to be updated for the rigs it is designed for.
Verified purchase: Yes | Condition: New
Well made looks like the origal cable that came with the radio happy days
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in CB Radios
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
