CURRENTLY SOLD OUT

Onkyo M-282 2 Channel Power Amplifier

About this product

Product Information

If you're searching for high-fidelity audio, the Onkyo M-282 2 Channel Power Amplifier may be the solution. This excellent technology ensures strong sound, accurate signal, and complete control over your listening experience. It's also easy to use, conveniently sized, and stylish. If you're tired of struggling with subpar equipment, consider investing in this professional grade Onkyo amplifier. The M-282 is a powerful way to upgrade your home entertainment system. It utilizes the brand's Wide Range Amplifier Technology, which ensures dynamic power. Thanks to this tech, 2x100 WPC RMS are pumped into 8-ohm stereo systems. Alternately, 2x125 WPC RMS are pumped into 6-ohm stereo systems. The WRAT also provides greater signal accuracy. Even when sound is coming from high-resolution sources like DVDs, accuracy is not diminished. This technology applies an unusually low amount of negative feedback, which helps to get rid of the adverse impact of counter-electromotive force. WRAT also ensures that all sections of the amplifier are made of high-tolerance parts. To maintain the brand's high standard of quality, Wide Range Amp technicians always strive to create the most innovative circuit topology on the market. All of this innovation combines to create a product that delivers a flat response beyond 100 kHz. This amp can be used to upgrade from a 5.1 surround receiver to a 7.1 surround receiver. To make sure that this process goes smoothly, check to see that your current receiver has the appropriate preamp outputs. The M-282 is not a traditional preamplifier, and it does have surround processing features. Instead, it offers line-level signal amplification. The M-282 also has a 12-volt trigger, a standard feature on many comparable systems. This allows users to rig the product so it automatically detects an audio signal and powers on in response. Users who want multi-room auditory distribution can make use of the passthrough jacks. These jacks allow users to daisy chain similar components, which can expand the listening experience throughout an entire house. Other technical specifications include a frequency response of 10 Hz to 100 kHz and a signal to noise ratio of 110 dB. The rear panel of this amp features a number of controls and connections. When the system begins to hum, owners can use the ground terminal to eliminate the unwanted noise. The rear panel also has the audio in/out jacks. For best results, users are supposed to connect the pre-out jacks to the audio-in jacks. To adjust the signal input, users can turn the input level control to max. The rear panel facilities also include the speaker terminal and the AC inlet. The speaker terminals are meant to be used with banana plug connections, and the AC inlet connects the device to a wall power outlet. People who purchase this Onkyo product will receive a power amplifier and an AC power cord. The amp is housed in a durable chassis constructed of brushed aluminum. This well-constructed amp is built to last for years to come. The device measures approximately 17 inches by 6 inches by 13 inches and weighs 18.7 pounds. This relatively small size ensures that it will fit into most home theater facilities, and its stylish exterior makes it a welcome addition to any home.

Product Identifiers

BrandOnkyo
MPNM282RB, M282B, M-282RB, M282, M-282
UPC0751398004063
ModelM-282
eBay Product ID (ePID)117519327

Product Key Features

Audio OutputsRCA, Binding Post
Number of Channels2
TypePower Amplifier

Dimensions

Weight19lb.
Depth12in
Height6in
Width17in

Additional Product Features

Audio InputsRCA
Power Per Channel at 6ohm125W
Thd (Total Harmonic Distortion)0 %
BridgeableNot Bridgeable
No. of Speaker Outputs4
Power Per Channel at 8ohm100W
Frequency Response10Hz-100kHz
Remote ControlWithout Remote Control
Audio Snr110dB

Ratings and reviews

4.6
13 product ratings
  • 11 users rated this 5 out of 5 stars
  • 1 users rated this 4 out of 5 stars
  • 0 users rated this 3 out of 5 stars
  • 0 users rated this 2 out of 5 stars
  • 1 users rated this 1 out of 5 stars

Would recommend

Good value

Good quality

Most relevant reviews

  • Onkyo M-282

    This power amp is very clean sounding. It's ideal for a zone 2 set of small to medium speakers (bookshelf). It's also perfect for bi-amping speakers with separate high and low frequency terminals as it will provide 100 watts (8 ohms) per side (either with a separate amp or by utilising a receiver's pre-out and looping back to the same receiver's built-in amp).

    Verified purchase: YesCondition: Pre-owned

  • Good old Onkyo

    Have been a big fan of the brand for years , Despite the fact that almost everything is being built overseas , Onkyo , to me , remains something of great value . I bought the amp for a very special project . So far so good . Clean sound , strongly build and cheap . A great buy .

    Verified purchase: YesCondition: Pre-owned

  • Onkyo power and reliability

    I like this unit because of it's power [100 REAL wpc], versatility [a power amp that can be daisy chained to other units], and that always present Onkyo build quality and ease of use. I highly recommend this unit, especially if you can get it for around $100 like I did.

    Verified purchase: YesCondition: Pre-owned

  • Used in high power midrange.

    Not a high current amp but works well. Won't match my phase linear 400 that went bang but for 100 bucks it's fine. Using as a mid range amp in a triamp system. It does run quite warm when pushed running midrange. It may overheat if used with heavy bass.

    Verified purchase: YesCondition: Pre-owned

  • m282 amp

    This amp seems to have clean power and is very easy to hook up. It works well with my other Onkyo stereo equipment. I would recommend this amp for use as a surround sound amp or for stereo,

    Verified purchase: YesCondition: Pre-owned

  • Pool amp

    I use these onkyo amps to run my outdoor pool area speakers. Each amp is running 2 pairs of 8 ohm speakers. The amp is feed from zone 2 of my onkyo surround sound amp. The 3 zone powers with front yard speakers.

    Verified purchase: YesCondition: Pre-owned

  • Surround amp.

    I use this to power the high left and right speakers in a 9.2 surround system.

    Verified purchase: YesCondition: Pre-owned

  • Onkyo amp

    Works great for 9.2 with my onkyo tx-nr818 love it

    Verified purchase: YesCondition: Pre-owned

  • Onkyo m282 power amp

    Excellent listening experience when paired with my McIntosh pre amp

    Verified purchase: YesCondition: Pre-owned

  • Who knows

    Power cord wasn't included, box was ripped open upon arrival.

    Verified purchase: Yes

More items related to this product