CURRENTLY SOLD OUT
About this product
Product Identifiers
BrandLee Precision
MPN90232
GTIN0734307902322
UPC0734307902322
ModelLee Precision
eBay Product ID (ePID)12011031739
Product Key Features
Ammunition TypeRifle
Gauge/Caliber.223 Rem
TypeReloading Dies
Ratings and reviews
Most relevant reviews
- 22 Mar, 2016Most favourable review
Better than a single stage press for the occasional reloader
I find this simple set to be actually faster for reloading brass that is already the proper size, such as once fired brass. if you are a weekend reloader, or someone who collects their own once fired brass for reloading, this is a much more economical way to reload that buying a set of dies as well as a single stage press. It is less than half the cost and does the same thing. I would tell anyone who is new to reloading to start with this set. I was able to reload 40 rounds in less than 45 minutes. I would do this again every time. A great buy!Verified purchase: YesCondition: New
- 29 Nov, 2016Most critical review
Lee loader
When I first got this it looked like it was of made pretty good. But upon use it was marginal, the primer cup holder (washer) came loose and wants to fall completely out. And the base that the primer sits on apparently has some springs under it to give cushion to the primer. Thats fine but it doesn't go up and down evenly when installing a primer. Between the cup holder and the base it often results in a primer being installed at a angle. The primer decapper rod rolled off my bench and hit the floor just right and the tip broke. Seems like it should be made of good enough material that it could withstand a fall like that.Verified purchase: YesCondition: New
- 19 Oct, 2017
Great for beginners
The lee classic loader is a great product for people wanting to try their hand at reloading without going to the poor house in the process. I have one in 223 rem and 7.62x54R and they both work great. I get nice consistent loads every time. They are packaged in a convenient plastic case that is small and does not take up your entire bench/work table. Keep in mind you are not going to load a bunch of rounds in a short time, but it WILL load rounds. It's not needed but I do recommend the lee primer pocket cleaner and the lee dipper set just to make life easier. I will and have recommended this friends and family alike and if you are thinking about getting one, go ahead I assure you will not regret it.Verified purchase: YesCondition: New
- 21 Jul, 2016
It just plain works.
Got this kit to try my hand at reloading to see if it's worth the time. The kit is put together very nicely. Just removing the spent primers averages about 10-12 per minute. The rest of the assembly procedure takes a little longer, but it allows you to pay attention to consistency. No need to spend $200 on a kit that does the same thing only twice as fast until you know you're ready for it. Overall, very satisfied.Verified purchase: YesCondition: New
- 03 Apr, 2018
Great buy
I've bought a couple of these for very precise loading in my main hunting calibers. They are slower than a press, but does a better job than a press and are easy to use. The only negative is that they only resize the neck so you don't want this if you are going to do AR rounds.Verified purchase: YesCondition: New
- 17 Nov, 2016
Lee Rifle Loaders
I started using Lee Classic Loader for a brand new Remington .243 BDL in 1976 with excellent "Roll my own" reloads. One shot - One deer. I have expanded to more rifles with excellent economical results. I also reload .45LC and .38/.357. My grandchildren love to "help Paw Paw make bullets". (safely supervised). Followed by a trip to the ice cream place. I love being with my grandkids and appreciate the "Help"! Start 'em out young, etc.Verified purchase: YesCondition: New
- 28 Dec, 2016
A bit slow ,But makes great ammo.
I have used Lee Loaders most of my adult life. They can make ammo that is very accurate. Some of my most accurate loads have come out of Lee loaders. It takes a bit of time to do the loading because you have to do every operation by hand, no loading press. This is ok for makeing small amounts of ammo. I like using this tool at the shooting bench to develop loads. Take it and the components and load a few, then shoot it. Make a change and shoot it. Tis saves a lot of trips back and forth from home to the range. Leon Hart 607leonVerified purchase: YesCondition: New
- 18 Dec, 2015
223 HAND LOADER
does what it is made for, the lenth is easy to slipbout of adjustment, you really have to use the caliber often, over all this is a good reloader, I would give it a 9 out of 10, this is great theropy, keeps your mind focused, if you miss 1 step, you have screwed upVerified purchase: YesCondition: New
- 08 Jun, 2016
Great product for the money
This reloader is better than I though it would be. Very easy to use.I got it for my son. He thinks its a lot of fun to make your own bullets. Lee makes a very good product and the price is good an cheap. And will buy more of their products.Verified purchase: YesCondition: New
- 23 Oct, 2015
For the sometimes reloader.
Good set. If the large cost and confusion of reloading presses gets to you start small. I am starting with this, and adding items as I go along. Besides it fits into the safe, and no new work bench. Someday may get a press setup, for now this works great. Yes takes a bit longer to reload.Verified purchase: YesCondition: New
