 |
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Top picked items
Perfect epoxy for applications where components get hot in use. Standard epoxies can be melted by boiling water, so are no good for car cooling system projects. Easy to use and performing well so far. Not suitable for "quick fixes" because the setting time is fairly long. Can apparently be machined, but I didn't need to and I liked the dark grey finish.
Verified purchase: Yes | Condition: New
The product was recommended by a friend unfortunately it didn’t work and the repair I tried to fix failed again. Tried another product which features an 🦍 animal in its product name and that work like a dream. But this product may work in a different situation than mine as my friend was shocked when it didn’t work for me. So it may work for you just not me..
Verified purchase: Yes | Condition: New
Worked perfectly to mount back the metal heatsink brackets on the stacked fiberglass layers of my notebook motherboard (ASUS ROG GL552JX). I had my doubts regarding this matter because I saw an article online about someone not being able to get it fixed using epoxy resin. However, decided to give it a go with JB Weld and now the brackets don't seem to detach anytime soon! Just follow the instructions (degrease and roughen surfaces a bit) and don't be shy putting a little extra on the outer side of the bound once in place, since JB Weld is not electrical conductive. Allow to cure 24h for safety and you're good to go :)
Verified purchase: Yes | Condition: New
this is far and away the best product I have ever used of its type.I used it to fix a petrol tap into my motorcycle tank because the tank thread was damaged.I first tested it by gluing a pair of large new nuts together with this JB weld after cleaning and roughning them they were put into a jar of petrol.After 2 weeks in the petrol they were taken out and were still fixed together and could not be pulled apart.JB weld sets rock hard but unlike many other products it really does STICK.I would recommend JB weld way above any other product of its type.
Verified purchase: Yes | Condition: New
There was a hairline crack in the cast iron crank case of my tractor, which resulted in a significant oil leak. I cleaned the crank case and using meths, followed by a light touch with a power file. I then applied a small amount of J B Weld along the crack line. 24hrs later I started the engine and it has cured the problem. It’s a couple of weeks since I made the repair and so far so good. If the problem occurs again this is an easy and quick fix.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Adhesive Tapes
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Adhesive Tapes
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
