CURRENTLY SOLD OUT
About this product
Product Identifiers
BrandBritpart
Manufacturer Part NumberSTC50027
eBay Product ID (ePID)1254457806
Ratings and reviews
Most relevant reviews
- 27 Apr, 2017
Super! (Not for PDC on lower guards)
L8 is awesome and have great prices, I switched from the metal ones as sanding and repainting gets old as they rust out inevitably. Also, if you drive your truck offroad the metal ones have a large gap off the rear light and actually angle forward scooping branches into the light. No good. The G4 are basically flush mount to the body and lens versus metal and have a angled pitch wedge that moves branches away when going forward. My '04 with PDC can't use the stock fittings for securing the lower guards. Modify at your own risk! The outside sensors are almost exactly where you need to drill the bumper for the stock anchor system. Uppers mint and no brainer install. Looks naked to me without them regardless of usefulness.Verified purchase: YesCondition: New
- 12 May, 2020
Makes the rear of the Rover look more beefed up.
Really good made ,went on pretty ease but when you have to drill holes in the rear plastic bumper cover it will take a 3/8 drill bit if you do not have a metric bit and you will need a thinner piece of thinner metal to make the inserts pull up tight because the one they send with the kit is to thick.Verified purchase: YesCondition: New
- 13 Sep, 2017
Light in weight and will not RUST
Purchased for my 2004 Land Rover Discovery II. It took longer to open the packing then it to install these on the vehicle. The look like the guards that the G4 uses. I think these will last longer than the metal guards. ThanksVerified purchase: YesCondition: New
