Picture 1 of 3
Picture 1 of 3
VANSON V03SP Locking Kidney Bean Tuner Head - Chrome, Set of 6
Vanson Guitars (83857)
100% positive Feedback
Price:
£37.90
Returns:
60 days return. Buyer pays for return postage. If you use an eBay delivery label, it will be deducted from your refund amount.
Condition:
Designed for any guitar project that deserves a set of high quality machine heads. for Les Paul ® SG® PRS ® type guitars (3-a-side). Les Paul®, SG®, PRS®.
- Buy it now3+3 Vanson Chrome LOCKING Tuners, Machine Heads for Les Paul, SG, PRS* V03 SP-CR
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
About this product
Product Identifiers
BrandVANSON
MPNV03SP
UPC5060479552832
eBay Product ID (ePID)1266033834
Product Key Features
ColourSilver
To FitElectric Guitar
TypeTuning Peg
Ratings and reviews
Most relevant reviews
- 20 Sep, 2018
Very well made locking tuners
At this price point, for a locking tuner not from one of the established names, I wasn't expecting too much, but these tuners are excellent! As advertised they are 19:1 ratio and are very smooth in operation, with minimal backlash. The tuner buttons don't flop about, they are a tight fit on the shafts and when checked before fitting to the guitar, the tuner posts do not wobble about in the housings. The locking system is simple - the knurled thumb knob turns a threaded rod that runs up a hole in the centre of the tuning post - and if you unscrew it far enough it will 'fall out'. But this is unlikely to happen by accident, you need at least ten full turns anti-clockwise to unscrew it. The tuners are also well finished, the standard of chrome plating is very high.Verified purchase: YesCondition: New
- 29 Sep, 2019
Perfect fit on my PRS SE custom
Same performance as the brand name tuners for less than half the price? Brand names are great but bargain parts that perform at least as well if not better is more desirable to me! I have no complaints.... they are the perfect upgrade to this particular make/model of guitar! A couple of small upgrades (tuners/nut) will make a SE into a pro-level axe! Just a little side note - I originally got this guitar from a friend and started using it with my most expensive amp - a Clark clone of a '57 tweed deluxe. It sounded very nice, but less than awesome... until I plugged it in to my Boss Katana 100 watt. BAM! SUPER TONE! It's actually like a magic combination for classic rock/ blues/ heavy rock! Cuts through beautifully, articulate full rich gritty tone that you can tweak to your liking! Think Marshall Plexi type tone. I show up at my friends house party with just the amp and the guitar and my fellow musicians were FLOORED by how good it sounds. I LOVE IT!Verified purchase: YesCondition: New
- 26 Apr, 2017
Excellent
I wish I'd bought these sooner. I hate guitar string changes at the best of times but these make it an absolute doddle. I swap strings often from heavy to light and then to flatwounds and can now keep a few different sets in my bag for quick change over. Just slip the string through the hole, tighten the locking screw, tune, cut off excess. Easy. The tuners themselves I thought were excellent quality for the price and I've got no complaints at all. Obviously fitments can vary but they were a like for like swap on my Ibanez with 10mm tuner holes. I've added a few pictures of the 3 + 3 set fitted which are handed for either side of the head.
Verified purchase: YesCondition: New
- 14 Jan, 2018
A great locking tuner for PRS SE Custom 24
This Vanson tuner is a direct drop-in replacement for the stock tuners. No mods of any kind are required as they are a perfect fit, but you will need to use your original screws because the Vansons are too small in diameter. Trust me, this is not a deal breaker. The chrome finish on the washers and nuts is not the same super bright finish as the stock tuners, but that doesn't bother me one bit. They look like highly polished stainless steel and they lock like they're supposed to. These are terrific locking tuners for the cost.Verified purchase: YesCondition: New
- 29 Feb, 2020
Variax jtv59 replacement
Always had tuning issues with my les Paul shaped variax, decided enough was enough and that the first step should be to replace the machine heads, I saw a lot of good reviews for these vanson tuners so I hoped they might alleviate some of the problem but actually they straight up cured all my tuning problems with one hit, actually tuning up the guitar is a lot easier due to the better ratio of the gears compared to the ones factory fitted on my variax, and it's holding tune much, much better, I've just fitted them along with new strings and once the strings had stretched in a bit the guitar held perfect tuning for an hour of noodling and pitch bending, awesome! I usually have to tune up every other song. These tuners are excellentVerified purchase: YesCondition: New
- 22 Dec, 2016
My Review of Vanson Tuners
I have purchased three sets of Vanson tuners, two sets of three on a side for my PRS SE guitars, and one set for my Mexican Strat. They fit the original mounting holes perfectly, though the screw sizes are smaller, requiring the old screws to be used. If I were to suggest a design change it would be to use a larger screw size. The gear ratio is great and the smoothness of turning is also great. The locking mechanisms are perfect for thin gauge as well as thick strings. These Vanson tuners are half the cost of the major name brands and work just as well.Verified purchase: YesCondition: New
- 31 May, 2017
Fitted to SG double cut
Had two sets , fitted a set to LP Studio , superb result stays in tune , very hard rhythm player, The over to a copy SG Gibson , lead players guitar, I would put it up against any Gibson , iIts a great comfortable player , had a lot of over Mods , Most importantly after a 3hr gig stays in tune .Verified purchase: YesCondition: New
- 23 Sep, 2020
Recommended
Put these on my PRS SE custom 22 semi-hollow. I had tried Schaller locking tuners but they seemed to have a fault, they were vague & laggy so they were returned. I replaced with these and the Vansons are perfect, stable, good gearing. I retained the original screws because the Vanson ones were too thin, but orig PRS fit the Vansons fine. So - yes I would recommend no probs.Verified purchase: YesCondition: New
- 12 Oct, 2019
Amazing value for money
Bought a couple sets. Perfect fit for my Harley Benton guitars. Didn't need to ream the holes and the screw holes were in the same place as well. Really solid and smooth turning. Rivals locking tuners of double+ the price. Can't speak for longevity yet, but initial impressions are that these are amazing value for money.Verified purchase: YesCondition: New
- 10 Mar, 2020
Great tuners.
Brilliant. Perfect fit,very well made and look great. The most important thing is,do they work? Yep,they hold tune perfectly and takes the bind out of changing strings,especially if you have a Bigsby trem.Verified purchase: YesCondition: New
