CURRENTLY SOLD OUT
About this product
Product Information
Make efficient repairs to your electronics with this electrically conductive soldering gun wire in a jar. This wire and glue form a permanent bond that's highly conductive. It works on alternating current and direct current circuits that deliver up to 400 volts of electricity. This wire is easy to apply and is designed for an array of applications. It's used for mechanical connection flex boards, solar cell leads, radio frequency shielding, computer repairs, and connector repairs.Product Identifiers
BrandAmerican Science & Surplus
MPN400
UPC0831195001004
ModelSoldering Iron
eBay Product ID (ePID)1300453321
Product Key Features
Solder FormWire
Solder TypeWire Glue
Dimensions
Width40
Weight0.05 pounds
Ratings and reviews
Most relevant reviews
- 03 Apr, 2016Most favourable review
Good function for the price
Its A Mixture of Graphite & Water Soluble Glue comes with lots of caveats so do some application research. Also it is not tacky so either use a clamp, tape, or be prepared to hold the object. It's thin & watery perfect for making carbon traces on remotes but apply sparingly in layers. After it is dried to the touch, it will not conduct electricity very well until it's fully dried. It gets Brittle and will crack away under any kind of stress or flex so be prepared to reinforce whatever you're mending with either superglue or epoxy. Lastly it is not really ferrite base, not as good at conducting electricity as you probably hope it would be. It does conduct a current but low, so not as well as solder. I fixed a TV remote, and it worked ok. Given the alternative (buying and/or using a soldering unit) it's better than nothing.Verified purchase: YesCondition: New
- 06 Aug, 2019Most critical review
Good for small wires.
This glue works well for places that are not easy to solder. It is a little bit runny and does need CA to make the bond stronger after the glue has set up.Verified purchase: YesCondition: New
- 27 Mar, 2020
Better then solder, wire glue can do the job.
This product makes working on guitars so much easier the a solder gun... It takes longer because its gotta cure overnight but it's well worth it. I lose patients with a soldering gun... But with wire glue I actually enjoy working on instruments. Say I want to replace a pickup.. I open the back panel, cut the wires to the pickup at a convenient spot, insert the new pick up, twist the new wires to the old ones, paint the connection with wire glue and let it sit overnight. Then I cover the painted connection with a layer of gorilla glue and let it dry for an hour. Job done. I love wire glue and I use it for everything...Verified purchase: YesCondition: New
- 08 Mar, 2018
wire glue
The only drawback with product is (and the problem is defined) liquid black glue. Take time to have paper towels on hand and work with the product accordingly. It will leave black stain on anything it touches and is almost impossible to get off. That said, product does the job as indicated. Worked very well for me. I would recommend it for small, craft projects and tiny electrical wires that need to be reattached.Verified purchase: YesCondition: New
- 03 Oct, 2017
Of the few on the market it is the best and by far the cheapest
The product isn't exactly what I wanted it doesnt hold as well as I would want but compared to the few things that's actually on the market it does a better job and it's a whole lot cheaper so I'm glad they make it and I found it and I looked for a long time for something. Now I found if I wanted to be stronger I just put a two-part waterproof epoxy on top of it and then that's exactly what I wantedVerified purchase: YesCondition: New
- 24 Apr, 2018
Like liquid solder
I used WireGlue to fix a broken connection on a touchpad where I could not use solder. WireGlue itself has high resistance, so I used a thin wire as a bridge. Don't expect WireGlue to act like a wire; more like solder. Otherwise it works well to attach 2 conductors together.Verified purchase: YesCondition: New
- 11 May, 2017
Conductive glue
I use this conductive glue for my small drone fly control board to glue small motor wire onto the board, and found out it will not work, this glue does not work well with small wires. It should work with larger wires and circuit board, but didn't perform for my small project. I will use this glue with proper project comes along.Verified purchase: YesCondition: New
- 18 Aug, 2018
It's fantastic, I wasn't sure til it got here & used it. WOW
Product works great, better than I expected. It's excellent.Verified purchase: YesCondition: New
- 02 Oct, 2016
Ceiling fan remote fixed at last!
I've been fooling with my fan remote for several years. I would clean the button contacts and it would work for a short while and then quit again. I even tried metal tape on the contacts, which worked for quite awhile until it came loose and caused more problems. One application of wire glue and it is working like new for weeks. Don't know how long it will last but it's so easy to apply I'll just add some more. Great stuff!Verified purchase: YesCondition: New
- 05 Jan, 2021
Great Product! Re-established Functionality!
This is one of your typical YMMV products. But for my purpose it proved to re-establish functionality of some PCB board traces after 10 minutes of application. After a good stir (several minutes) I applied the mix on several broken traces on a PCB board that suffered due to battery leakage. I let it dry under a 40W lamp for some minutes and tested functionality: the item worked once again flawlessly. Obviously, this is not how professionals bridge traces and longevity of the connection has yet to be seen, but until I get around of rebuilding this PCB from scratch this product surely has saved the day!Verified purchase: YesCondition: New
