CURRENTLY SOLD OUT
About this product
Product Identifiers
BrandDeltron
MPN59501005950500
eBay Product ID (ePID)1309138238
Product Key Features
Connection Split/Duplication1:1 (None)
Compatible ProductSpeaker, Cable
Ratings and reviews
Most relevant reviews
- 24 Jun, 2020Most favourable review
Well-made plugs but 1st time users of the Camcon BFA plug style will need to work out the best way to install; not intuitive!
I clicked 'easy to use', but to be honest if you've only ever used 'normal' banana plugs it does take a bit of thought and trial and error to find the best way to fit these. You also need to puncture the plastic cap tip to use in one configuration. Other than that initial confusion this is a good product, well made and works as intended with a nice secure feeling connection. I would just like to see a single pictogram-style instruction sheet to assist those using this style of plug for the first time.Verified purchase: YesCondition: New
- 11 Dec, 2022Most critical review
Good product that is a bit limited in its application.
These plugs are easy to attach a speaker cable to and easy to assemble and are very safe to use when assembled correctly. They work well with amplifiers that have BFA type binding posts. I am using mine on speaker cable attached to an Arcam amplifier that has BFA type binding posts and they work well in this application. However, only a small number of manufacturers, such as Arcam, Cyrus and Linn fit their amplifiers with this type of speaker cable connector. So, if you plan on later using a different manufacturers amplifier with the same speaker cable, then you may have to swap your Deltron BFA connectors for a different type of connector. If this is a consideration for you, then I would advise you to use spade type connectors on your speaker cable as these can be used on almost all modern amplifiers and the majority of vintage amplifiers also.Verified purchase: YesCondition: New
- 18 Aug, 2023
These BFA's fitted my Cyrus 6 amp speaker inputs perfectly,
These BFA's fitted my Cyrus 6 amp speaker inputs perfectly, with no movement. Easy to install. Screw to secure the speaker wire very works well. Gold plated for better connectivity at a great price compared to other Amazon products,Verified purchase: YesCondition: New
- 19 Dec, 2019
Good Speaker Cable Plugs for a Cyrus Amplifier
Perfect fit for a Cyrus 5 amplifier, good quality product with plenty of room for large diameter cable and good positive grip from cable fixing screws. Cables can be mounted on side or on top of plug, to suit your preference/set-up.Verified purchase: YesCondition: New
- 29 Jul, 2020
Good connectors but no instructions and fiddly to assemble
Tricky to assemble with no instructions as to best practice as to how to assemble as there are - I believe - 2 ways to put together. This is more likely to be an issue with the product manufacturer and not this supplier/ebayer or the type of connector which has been a standard for many decades. Instructions would be preferred even if online.Verified purchase: YesCondition: New
- 10 May, 2023
The only choice if you use Linn.
Despite the fact, there is no other choice of connectors if you want to use certain brands of audio kit, these are good-quality plugs that eliminate the possibility of shorting.Verified purchase: YesCondition: New
- 10 Jun, 2020
Modifications may be required
Bought these to fit to my Cyrus Amp and Van Damme LC-OFC 2x6mm cables and I had to make some modifications. The good news is all is well, everything sounds great and they fit my amp better than Z Plugs. If I had a pillar drill I’d have drilled out the centreline m4 brass hole to remove the threads so the copper ends of my cable fit better but all that was needed in the end was to drill out the plastic end cap to 6mm because the hole wasn’t big enough to feed the outer insulation through. Shame these weren’t made a fraction bigger as 6mm cable isn’t uncommon.Verified purchase: YesCondition: New
- 09 Feb, 2024
Deltron to the rescue .
Purchased a used Cyrus Amplifier but it came without the special speaker cable connectors that are required on the older models. The Deltron BFA camcon plugs saved the day and fitted perfectly into the Cyrus terminals. These are a hard to find connectors and many people are not aware they are required on a few makes of the older models on Hi Fi units .Verified purchase: YesCondition: New
- 13 Apr, 2024
This is not the quality I was expecting from Deltron, the brass connector fits well and is easy to work with, the plastic housing is not as soft as I'
This is not the quality I was expecting from Deltron, the brass connector fits well and is easy to work with, the plastic housing is not as soft as I'd expected but the worst part is the end caps that are really thin, cheap looking and very fragile. I won't be playing too much with these. When you try to puncture the hole for the wire, some of the hole pieces just snapped others are harder to get through. Inconsistent quality.Verified purchase: YesCondition: New
- 06 Aug, 2016
Deltron BFA connectors
Great piece/connector once you figure out how to use them...Frankly, I cant imagine anyone so stupid who would plug their high voltage household electrical wires into a piece of Hi Fi gear....Seems to me as if Naderism has been brought over to the UK from the good o'l red, white, and blue land across the ocean...protecting people from their own stupidity. That being said...these are without a doubt the most "positive fitting connection" I have ever used...five way binding posts, tightened with a 1/2' inch nut driver works well...but has limited amount of actual surface area for connection, The BFA connectors have vastly greater actual contact area, does this make a noticeable sonic difference, don't know I have no way to a/b them.Verified purchase: YesCondition: New
