CURRENTLY SOLD OUT
About this product
Product Information
The CMC Pt-130 Tilt and Trim is designed for compact engines that power boats. This gadget is designed to enhance performance and stability on the water. The highly durable aluminum material and steel fasteners on the housing protect against the harsh environmental hazards that are typically found in ocean water. During traditional boat trips, the CMC propels a vessel through the water with ease because it has an electric hydraulic actuator that can handle 7853 pounds.Product Identifiers
BrandCMC
Manufacturer Part Number13002
GTIN0739697130027
UPC0739697130027
eBay Product ID (ePID)1342078505
Product Key Features
California Prop 65 WarningCancer and Reproductive Harm
Ratings and reviews
Most relevant reviews
- 16 May, 2017Most favourable review
Rugged, tilt feature works well, as advertised.
This is a heavy package. On arrival noted some carton damage and a couple of hardware pieces lost during transit, but the unit was fine. Replacement hardware available at the hardware store. I would have ordered with gage but did not see one offered. With a little research I found that the gage kit can be ordered directly from CMC for 3 bills. Instructions are adequate but not exceptional. I needed to attach a Merc 115 clamp-on transom mount. The instructions describe a clamp kit but not very clearly. I choose to adapt it myself. Had some fit problems and then interference with the left side clamp screw hitting the hydraulic ram housing. I was able to modify the left clamp to get at least 50 or 60 degrees of tilt which is satisfactory but it made for a long day. The right side is ok because the ram is mounted to the left. The materials are of high quality including the switch and wiring. Everything is nicely prewired so once you get the mechanical assembly done it's very easy to finish up.Verified purchase: YesCondition: New
- 31 Oct, 2019Most critical review
Waste of money!!!!!!!
Product seems a little slow.. I believe the actuator could use some upgrades. I wouldn't recommend putting this jack plate on your boat.. keep factoryVerified purchase: YesCondition: New
- 15 Jun, 2020
Tilt Trim Made Easy
Product did exactly what I needed it to to without having to get up out of the drivers seat. I can beach my boat without having to worry about the prop or hanging off the back of the boat to manually lift the motor out of the water. Wiring and controls made it a quick and simple hookup.Verified purchase: YesCondition: New
- 13 Feb, 2019
works great--happy happy
i could not find a replacement for my yamaha 40 so i bought this. good , price, fast delivery and bolted right up with no additional drilling. i did have to add hole to console because i was not wanting to figure out boat wiring and with this all i had to do was mount the switch and connect to battery. don't get any easier so was able to do by myself and not pay someone to do it.Verified purchase: YesCondition: New
- 08 Jun, 2021
CMC Tilt Trim
This hydraulic tilt trim is exactly what it was advertised to be. It was new in the box and once installed it works well for raising and lowering a boat motor and Fine tuning the trim once on plane. It is a well built piece of equipment perfect for any outboard motor without a built in tilt trim system.Verified purchase: YesCondition: New
- 01 Jan, 2020
WIll let you know more later on about the middle of January Sorry i am not into photos.
I really cannot give you a good review of the cmc pt 130. I will have it put on my boat around the 8th of January. I didnt have a motor lift i would have to rent one so i just had it put on by a boat mechanic friend of mine. I can let you know more then. Thank You, Bobby LucasVerified purchase: YesCondition: New
- 26 Jan, 2018
IT'S SMOOTH
I just install pt-130 today haven't have it in water as of yet snow is melting here but will say install was a piece of cake to mount and operates smooth very well build would recommend to any one thanks : happy happy happy .Verified purchase: YesCondition: New
- 25 Jan, 2018
Great for older outboards
Put this on to lift a 1973 Johnson 85 works great easy install maybe two hour with a fork truck and a six pack thanksVerified purchase: YesCondition: New
- 03 Mar, 2020
Haven't used it yet . It was very easy to install. Just waiting on some warmer weather to try it out.
I didn't think I would find it and I did . So I'm just pleased.Verified purchase: YesCondition: New
- 21 Apr, 2020
good for an older , big boat motor!
Works great on our pontoon. easy to put on and wire up. A little priceyVerified purchase: YesCondition: New
