 |
this is a really good product we use it on our clever spar hot tub , because it is dome shape on one side it lets the rain flow off instead of sitting in a puddle on the cover . It really helps with keeping the water warm so win win
Verified purchase: Yes | Condition: New
Fits perfectly but as the water level is somewhat below the surface, the bladder is also low down therefore water still pools on the top cover, so disappointing in this respect. I’ve found that if you position the bladder more towards the surface and switch on the bubbles for a few seconds it lodges at the top. Then putting the cover over I get less pooling but it’s not perfect. I think the bladder will work well on tubs with a higher water level to start with.
Verified purchase: Yes | Condition: New
Actually bought for a different brand inflatable spa (lay-z) and fits great. Glad we got it. Would recommend.
Verified purchase: Yes | Condition: New
Thicker than the original lazy spa vegas lid. Seems to be better quality. Raised in the middle a little, so should prevent rain water pooling like it used to.
Verified purchase: Yes | Condition: New
I have a Lay-z spa Vegas 4-person spa and needed a new inflatable lid. My outer cover was ok but the inflatable was no good. This described itself as suitable for a 4-person spa however when you got it into the recess of a Lay-z spa outer lid it falls out. To overcome this, I inflated it inside the lining then I had to stitch the inner lining of the cover to make it tighter whilst the inflatable was inside it. Only then does it fit the spa. A bit of a pain but it eventually worked.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Hot Tub Covers
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
