I needed to repair a limestone fireplace which I bought on eBay. One of the thick side pieces was completely broken into two bits. The fireplace weighs a tonne and I wasn’t sure if this would be strong enough to handle a repair without the pieces already being installed or if it should be done in situ. It turns out it was easily strong enough. Impressively strong in fact. The colour wasn’t a close enough match for an invisible repair which bugged me. It was much paler. So I drilled out an area on the back of the fireplace which enabled me to collect some limestone dust. The resin from the repair I’d already done sank back enough that I was able to go over my repair with another fine coat. By mixing the limestone dust in to a small amount of this resin before adding the hardener until I was happy it was a good colour match, then add the hardener, I was able to go over the top with a perfectly colour matched finish. The resin leaves a gloss on the limestone which I was able to scrape off with the edge of a Stanley knife blade. You would never know it had been repaired now. It looks amazing. It worked so well that I ended up doing various other chips on the entire fireplace including corners of the mantle. They’re as hard as nails. I can’t believe how strong this stuff is. Couldn’t recommend it more highly.Read full review
Verified purchase: Yes | Condition: New
I’ve used this in other colours before when fitting granite worktops, I’m a kitchen fitter This time I needed to repair my marble mosaic topped garden table. It filled the small damaged holes well and polished to a shine with discs to 6000 grit. It’s an excellent jointing compound for stone too if you’re joining pieces too although you just always properly support those joints of course
Verified purchase: Yes | Condition: New
Used this repair kit to repair a marble bird bath, easy to use, easy to sand, nice invisible finish. Always remember never use too much hardener.
Verified purchase: Yes | Condition: New
I accidently broke a piece of my marble fireplace and figured it was a gonner. I researched repair glues and this one looked good. When I applied it, I thought it was worth a try. After 24 hours, I checked on the piece and it was a good fix. I was surprised how strong the join was. Without being careless I was able to pick up the very heavy pieces and the repair held firm. Very impressed!
Verified purchase: Yes | Condition: New
Tenex marble repair kit is very good.It was used to repair a 10mm chip in my marble fire place.It sets quickly and when hardened it sands down easily . For a relatively small repair it is quite expensive but it does the job.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Adhesive Tapes
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Adhesive Tapes
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
