Picture 1 of 4
Picture 1 of 4
Mira 415 Pressure Balanced Cartridge - Black (1.902.55.3.0)
ShowerShack (96085)
99.7% positive Feedback
Price:
£89.99
Returns:
60 days return. Buyer pays for return postage. If you use an eBay delivery label, it will be deducted from your refund amount.
Condition:
Mira CombiForce 415 ~ exposed mixer shower. Mira CombiForce 415 B ~ concealed mixer shower. Mira 415 ~ exposed mixer shower. Mira 415 B ~ concealed mixer shower. Mira model code - 902.55.
- Buy it nowMira 415 Combiforce Mixer Shower Pressure Balancing Cartridge - Black 902.55
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
About this product
Product Identifiers
BrandMIRA
MPN90255, 1.902.55.3.0
EAN5013181902556
eBay Product ID (ePID)1405236645
Product Key Features
Suitable ForShower
ColourBlack
RoomBathroom
MaterialPlastic, Metal
Assembly RequiredYes
Ratings and reviews
Most relevant reviews
- 22 Sep, 2019Most favourable review
Fixed dripping head and leak behind dial. So easy to fit. Like Lego, with a few screws.
Manufacturer original part in box, with instructions, New modified part and hub and silicone grease. Could be fitted in 5 minuets if you where in a hurry. So simple. Bit like Lego, with a few screws. Fixed my dripping shower and leak from behind the on/off dial. This is a manufacturer modified part and is an exact fit. But does operate with about 50 degrees more rotation than the original before it hits the red button stop. I took my time and descaled and cleaned all parts and inside the valve body housing. Cleaned the 2 rubber 'O' rings inside the cover, lubed with some extra silicone grease. But that is probably not necessary. Follow the instructions exactly and you cannot go wrong. The new cartridge has no built in stops and uses a modified hub to control stop points. Very important. There is a small white arrow on the exit port that must point to the cold inlet (labeled). This will mean the flat on the spline will either be directly south or north. All you need to fit is a small flat blade screwdriver to remove the dial centre cap (from the bottom of cap). A Pozidriv 2 (cross head screwdriver): 3 screws. and a largish flat head screwdriver. 4 screws. I would recommend to take photos when taking to bits at each stage, especially of the adjustable temperature stop location. I put mine back exactly where it was and all is fine. No further setting up required. (all parts mentioned are clearly labeled on a diagram in the instructions). You cannot really go wrong. Make sure you turn the water off! or isolate the feeds to the shower unit. Switch your combi boiler off if you cannot isolate the feeds to the shower. So simple, as I said. Bit like Lego with a few screws. If you can turn your water off, you can fit this part. D.Verified purchase: YesCondition: New
- 07 Feb, 2024Most critical review
Faulty Vavle - Was it a genuine part?
I purchased this balancing valve a few months ago and the plumber has just fitted it and has pointed out that it is faulty as it does not completely stop water flow to the shower head when it's turned off. The very reason I purchased it in the first place. The packaging was intact and sealed on arrival and has only just been opened today 7/02/2024. The fitter noticed and showed me a couple of small metal fragments that had been pushed out of the valve by the water pressure and one side of the valve does not properly open or close. i now need to purchased another valve in order to hopefully solve the problem and return the faulty part for a refund all of this is costing money as i have to pay the plumber regardless.Verified purchase: YesCondition: New
- 30 Sep, 2020
Good product but over-priced
This appears to be a good quality cartridge for the Mira shower. It solved the problem of water leaking out from the control unit. It was simple to fit. After fitting it the water temperature was not hot enough but I went on line and googled the problem and there was a simple adjustment to the unit. This involved partially dismantling again and moving / readjusting the cartridge within the fitting. I made the adjustments (it took a couple of goes) and I now have a very good temperature. My only gripe with this cartridge is the price itself. Although, as it happens, this was the cheapest one I could find. How on earth they can charge the prices they do (I paid around £66) for a little plastic gizzmo that surely costs about £2 to manufacture ! It shouldn't be more than £15 but it is !!Verified purchase: YesCondition: New
- 11 Nov, 2020
Balancing cartridge
Cured the annoying drip when turned off. Very easy to fit, took less than 10 minutes from start to finish. Much cheaper than buying a new shower.Verified purchase: YesCondition: New
- 21 Jan, 2024
Expensive part unfortunately.
Unfortunately you need this if your Mira shower is dripping , you could buy a brand new generic bar shower for less cost😀. But then it’s a major job to replace a shower as against just replacing this valve.Verified purchase: YesCondition: New
- 10 Aug, 2017
Eactly as described, Replaced an older model and fitted well to stop an existing dripping shower. The red plastic bit has changed slightly and couldn'
Verified purchase: YesCondition: New
- 13 Dec, 2018
Easy to fit.
Really easy to fit into our shower. The quality seems good so far, but only been in a few weeks. Will see how it holds up!Verified purchase: YesCondition: New
- 19 Oct, 2017
quality part
i found this part very easy to fit and provided the hot water id missed from my shower for weeks .Verified purchase: YesCondition: New
- 26 Aug, 2020
Excellent product
Easy to fit and worked a treat, no more constant dripping sound from the bathroomVerified purchase: YesCondition: New
- 30 Jan, 2019
Excellent.
Great product and easy to fit.Verified purchase: YesCondition: New
