 |
This is a big long bar, and as such is quite heavy, so it is going to be very useful when you need to apply a big torque but likely to only be used when a high torque is required, very unlikely to be used as a day to day tool. Not used yet but looks like it will do the job very well. I am going to give it a test over the weekend with a big bolt and see if it is up to the specification of 512 Nm in simple terms this equates to 51kg at 1m and the bar is best part of 3/4m long so in simple terms should be able to take all the pull or push I can apply to it if it lives up to the specification.
Verified purchase: Yes | Condition: New
The bar is far too small in diameter considering the length (the same diameter as my regular 10" socket-set bar) and flexes way too much even under moderate loading. As a result it behaves like a spring and does not transmit the force into the socket or bit fitted. In addition, the head is poorly machined - the parts are a very loose, sloppy fit. In addition the squared socket part is considerably under-sized. Sockets are a loose fit and the ball retainer is poor. I bought this to remove the M18 spline bolts that hold my Skoda rear hubs. The bar just flexed and would not loosen the bolts at all. I had to buy another brand - a shorter 24" bar but much thicker and better machined (and cheaper). This had no problem at all in completing the job. In all, a waste of time and money.
Verified purchase: Yes | Condition: New
it is very long and big enough for any half inch drive size fitment if this will not undo it get a cutting gun
Verified purchase: Yes | Condition: New
Great when you need to crack big threadlocked bolts on suspension arms, bushes brake carriers and driveshafts etc. Spring on ball bearing retainer is a bit on the weak side and larger sockets do tend to fall off but it does what its intended for.
Verified purchase: Yes | Condition: New
Great product and great to use. Works a treat for what I need it to do. Feels good and balanced a nd not light and cheap. It’s been put to the test a couple of times where I’ve expected something to break but so far, everything has held up.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Socket Wrenches
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Socket Wrenches
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
