CURRENTLY SOLD OUT
About this product
Product Identifiers
BrandProMag
MPNMOS01
Ean0708279013973
GTIN0708279013973
UPC0708279013973
ModelMossberg 702
eBay Product ID (ePID)15035047738
Product Key Features
For Gun TypeRifle
Number of Rounds10
Ratings and reviews
Most relevant reviews
- 01 Dec, 2024Most favourable review
Good value, fair quality
The ProMag brand will get you there, but it isn’t always hyper accurate with tolerances. One of the magazines had some trouble staying locked in the mag well, so I had to file down the case a little bit more below the lock ridge. This model of magazine does not use any cut out or hole to lock the magazine, it’s just a tapered cut in the magazine that makes a little shelf for the release to bite onto. All in all, they work fine. 10 rounds each, no feeding issues, good spring weight, and bolt hold open works. I would recommend these. They all have a lifetime warranty from promag so it isn’t like I couldn’t have had them swap the less functional magazine, I just didn’t want to wait that long.Verified purchase: YesCondition: New
- 05 Jul, 2022Most critical review
Hard to rate
Really hard to rate. Ordered the 2 pak and they arrived and everything looked good, but when I found when putting them in the rifle one works fine just like it should. The other magazine is hard to insert and almost impossible to remove. I can't see any difference but the one that is harc to remove has a much more noticeable scratch on the rear where it locks inVerified purchase: YesCondition: New
- 24 Sep, 2018
Better than OEM
This magazine is made with better quality than the one that Mossberg offers at a very competitive price.. I have many of the OEM magazines all in various qualities from the mfr. Some were purchased at shows and others online and some at retail stores and none of them looked as good as this Promag replacement. The primary is. Made with a metal body and a removable polymer base plate whereas the OEM is of all metal construction with non-removable base plate with no visible disassembly mechanism. The quality and craftsmanship of the Promag looks better than than OEM and feels very solid weighing in at around 40 grams which is 2 grams lighter than oem. The feed spring of the Promag has more tension but loads smoothly. The OEM spring sometimes has issues with failures to feed and not as smooth to load. The promag will require you to remove the baseplate in order for it to be installed into the magazine extended. This may not be as a solid fit than the OEM but can be done and functional. I'm very pleased with this magazine by Promag and wished they had offered this long ago to prevent me from buying the OEM mags which at times were hard to find and expensive. I definitely will be buying more in the near future and selling off some of my OEMs.
Verified purchase: YesCondition: New
- 12 Jun, 2023
Not bad out of the box, very good with a bit of work
Ordered the 3-pack. Works in Rossi RS-22 and Citadel Trakr. Sturdy construction and easy enough to load. Occasional malfunctions caused by the follower rocking backward in the magazine body. After some adjustments and lubrication, functioned flawlessly so far, 30-40 more rounds through each mag. FIXES THAT WORKED FOR ME: - Removed the baseplate and turned the spring around, with the tall end of the coil supporting the rear of the follower for a bit more leverage - Lightly sanded the rear of the follower to smooth the rough-finished plastic, rounding the step slightly - Cleaned and lubricated the magazine body, spring, and follower, removing any plastic flashing 10 minutes of work per magazine left them functioning as well as the factory mag.Verified purchase: YesCondition: New
- 17 Jul, 2022
Works with Citadel Trakr with a bit of FTEs
I bought to add 2 more mags to the one that came with my Citadel Trakr. They fit and feed the rifle nicely. After 500 rounds through the Trakr, I noticed that these mags do have occasional FTEs. It just happens to the 2 that I bought, as everytime FTEs happened, I tale off the mags and notice the black follower. The original mag that comes with the rifle has a red follower. I will still buy these if needed. Really dont have a choice as there is no Trakr mag out there. But they work with just the occasional hiccup.Verified purchase: YesCondition: New
- 25 Jun, 2019
Awesome Product
I have a few 701 Plinkster’s in the family and the Tactical 715T. I’m happy to report that I have have used it in each gun with no issues. I will note that this magazine differently than the “OEM” actually ejects “all” shell casings properly. No more jams or misfires. Thanks for a quality product at a great price!Verified purchase: YesCondition: New
- 02 Apr, 2020
Promag 10 round two pack best deal I could find. Works with Mossberg T-15 conversion.
Converted my Mossberg T-15 AR style .22 to a Promag stock and the 25 round clips that came with it just didn't look right so I purchased the 10 Round Promag magazine. Best deal I could find was this 2 pack.Verified purchase: YesCondition: New
- 25 Nov, 2022
Quality Magazine for the money
I purchased this Magazine for my Rossi RS22. Its well built and looks so much better than the one that came with the rifle. Although it fits a tad more snug than the stock one it works just fine.Verified purchase: YesCondition: New
- 06 Dec, 2019
No complaints works great definitely recommend this item
I just wanted to take a minute to thank everyone that had anything to do with this product works fine got here quicker than expected was everything I thought and then some I would like to thank you as well as ebayVerified purchase: YesCondition: New
- 25 Nov, 2022
Good Mag
A decent magazine for my Citadel Trakr .22. Would suggest taking the mag apart ( very easy) and giving it a good cleaning with a little lube.Verified purchase: YesCondition: New
