CURRENTLY SOLD OUT

Adseal 5L Block Paving Imprinted Concrete Sealer Super

About this product

Product Identifiers

GTIN5060279550007
UPC5060279550007
eBay Product ID (ePID)1512731402

Product Key Features

Installation TypeFixed
Size50 x 50 cm
Suitable ForBalcony, Terrace, Wall
ShapeRound, Rectangular
ColourClear
Number in Pack1
StyleSmooth
FeaturesFrost-Resistant
PatternNo Pattern
Stone TypeConcrete

Dimensions

Item Height10 cm
Item Weight5 kg

Ratings and reviews

4.8
107 product ratings
  • 94 users rated this 5 out of 5 stars
  • 8 users rated this 4 out of 5 stars
  • 1 users rated this 3 out of 5 stars
  • 1 users rated this 2 out of 5 stars
  • 3 users rated this 1 out of 5 stars

Would recommend

Good value

Good quality

Most relevant reviews

  • Most favourable review

    Great finish

    Worth taking your time to do a decent job. I jet washed my imprinted concrete drive twice then the day after applied the sealant. I purchased a deck scrubber type of brush and carefully made sure that I got into all the surface irregularities and also making sure that there was no excess sealant. The final result is great and I am very pleased with it but it is hard work to do a worthwhile job.

    Verified purchase: YesCondition: New

  • Most critical review

    "Super" not really

    3x5Lt tins to give 2 coats on approx 20sq or less mtr block paving. Thats being generous. Not the coverage stated on the tins. 1st coat I knew would sink in after initial clean. But 2nd coat should have made a noticeable difference. Sorry to say it didn't. The rain does bead for a while. Just a shame it doesn't give the sheen it states.

    Verified purchase: YesCondition: New

  • EXCELLENT PRODUCT,

    Read the instructions, follow the instructions and it is that easy to use. I used the same product 6 years ago and the block paving still looks good with NO weeds in the joints. This year I cleaned, topped up the joint sand and left it for a few days to make sure it was dry. I resealed the block paving using a 12" roller and taking my time the same as in the video. The block paving is as it was 6 years ago when it was new AND NO WEEDS.

    Verified purchase: YesCondition: New

  • Qouted£190 DIY £30

    I was quoted £190 for the job of resealing my front paths, It cost less than £30 . This product was easy to use ,went on quickly( even on printed concrete not sealed for over 15years) . I'm no expert at this, I just jet washed the paths, waited for them to dry. Then put the sealer on ( the hard way used a very cheap fence brush). and I still have enough to do another coat and will seal the rear back concrete as well with two coats.. Covered a large are with only a small amount( I didn't stint on loading the brush either). Only draw back is the smell, it was on my clothes ,all went in the wash. Don't tread on it while wet, it will leave foot print behind the colour of your shoe sole. Will order the colour next time to darken the sealer my concrete is old and has lost some colour. Very pleased with the sealer and the seller. Will order again in a couple of years to keep the pathes in good condition. Looking at doing my tarmac with products from the same seller.

    Verified purchase: YesCondition: New

  • Really good product

    Easy to apply and a great finish. I added the charcoal dye and it really made a big difference. It looks brand new again.

    Verified purchase: YesCondition: New

  • Simply the best

    Don’t waste your time and money buying cheap block sealer, pay the bit extra and buy this. Goes on easy, looks great but more importantly it lasts. Bought this product several times over the years and have never been disappointed. Would highly recommend.

    Verified purchase: YesCondition: New

  • Does what it says on the tin

    I have bought from this company before and have nothing but praise for the products they sell and the service they give. The sealer is excellent, we have used it on our block paving, we had reckoned on needing two coats so bought enough to do that. the first coat gave some concerns as it seemed to soak really well into the block paving, but on the second coat it really showed off the sealant qualities, giving a dull sheen and a water resistant coating it looks so good now. The only downside to this product is because it is solvent based it does give off a massive pungent smell for a few days but thats well worth putting up with for the results you get. I also opted to go one further and added a topcoat of the more expensive matt sealer and wow what an amazing finish now, if you can afford to put even one coat of the most expensive sealer on do it, its worth it and will give more wear to your drive/path way.

    Verified purchase: YesCondition: New

  • Good attractive sealant

    The block paving sealant is fairly easy to apply. I would recommend some cheap decorating rollers - so that rather than have the hassle of cleaning them they can be discarded after use. Not the cheapest but you get what you pay for

    Verified purchase: YesCondition: New

  • good product

    my brick paved drive is 15 years old. We have cleaned it but never power washed it. Weeds were becoming a problem so decided to bring it back to its former glory. Power wash, treat with weed killer, sand and seal. I estimated 12l for 2 coates and used 15l. Driive looks great but I may put coat 3 on for extra oomph! Applied with sprayer leaving 4 hours between coats ( VERY DRY SUNNY WEEKEND)

    Verified purchase: YesCondition: New

  • Concrete Sealer

    Good value for money, but last time I bought the slightly more expensive version & I used the remains of that first. I noticed the better quality one was better than the economy version, it was more hard wearing. Will buy more expensive one next time. In this case you get what you pay for.

    Verified purchase: YesCondition: New