Picture 1 of 4
Picture 1 of 4
Epson Print Head Cleaning Kit. Unblocks Printer Nozzles 100ml Cleaner
I
inkjet_rescue (1084)
100% positive Feedback
Price:
£9.80
Free postage
Returns:
30 days return. Buyer pays for return postage. If you use an eBay delivery label, it will be deducted from your refund amount.
Condition:
✚ 120ml is sufficient for 30 cleans. ✘ Artisan 7xx and 8xx printers. Inkjet Printer Cleaning Kit. ✔ ︎Ensure you can run the nozzle check and self clean facilities of your printer. ✔ Use fresh ink from a different supplier after cleaning.
- Buy it nowEpson XP Print Head Cleaning Kit. Unblocks Printer Nozzles 120ml Cleaner
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
About this product
Product Identifiers
BrandEpson
GTIN5060272340070
UPC5060272340070
eBay Product ID (ePID)1605364011
Product Key Features
Year ManufacturedEpson
TypeCleaning Kit
All listings for this product
Ratings and reviews
Most relevant reviews
- 22 May, 2017
Try it with confidence!
The product is good quality, delivered quickly, comes with gloves and syringe and two tubes of the cleaning agent. It's very easy to use, requires a little patience, but if this is used regularly, it should keep the printhead in a good shape. Unfortunately my printhead was beyond repair, in which case, the seller gave me £10 refund as advertised. You might not be able to repair every printhead, but with the refund promise, there is not a lot to lose.Verified purchase: YesCondition: New
- 13 Oct, 2016
Magnificent!
This is a terrific product with an amazing backup service. I found it easy to use, affordable, and most effective. Highly recommended.Verified purchase: YesCondition: New
- 02 Sep, 2020
Unblocking Epson Stylus print heads
Works exactly as described in the instructions and advert. I had difficulty in gaining access to the printer head due to the layout of my Epson stylus because the lid does not open as much as wanted, and the lid is difficult to remove. Fitting the plastic tubes over the printer nozzle tubes is tricky because of a necessary tight fight. Apart from difficulty in using the kit all worked well first time. Subsequently a single colour nozzle became blocked and I cleared this one only with the knowledge gained from cleaning all nozzles. Putting the printer into change cartridges mode, then pulling out the mains cable makes it easier to move the carriage for kit cleaning.Verified purchase: YesCondition: New
- 26 Jan, 2018
Did the trick
Had to use several times and for several hours but eventually my printer was restored to a functioning piece of equipment - I thought I would need to replace it so very pleased to report my successVerified purchase: YesCondition: New
- 14 Oct, 2017
Printhead Cleaner
I have tried this in my epson dx9400 printer. Although I could get the printheads relitavely clean, the printer is still not 100%. I put cleaner through a few times and let it sit for 48 hours but it didn't really help. I might give it another try, but I don't think it will cure the problem.Verified purchase: YesCondition: New
- 26 Jun, 2019
brings the dead back to life..
make sure you fully read the instructions the tip of warm the product up before you use it works a treat an epson printer i hadnt use for 3yrs in storage was up and running after just 48hrs of treatment.Verified purchase: YesCondition: New
- 30 Apr, 2020
Quick solution
Cleaning kit is very easy to use. Cured a blockage within 15mins on an Epson workforce, which had persisted for ages. Issue was caused by using 3rd party ink.Verified purchase: YesCondition: New
- 16 Feb, 2017
Works better over night
First attempt tried the quick method not successful so I tried the over night method worked very well, had to print a couple of colour prints to clear the slight smudge.Verified purchase: YesCondition: New
- 25 Oct, 2017
Perfect!
Easy to clean my epson printer with this kit! Finaly, my printer worked 100% in about 3 minutes. Enough liquid for more use. Tumb up!Verified purchase: YesCondition: New
- 24 Aug, 2017
Great job
I had tried other products which had only exacerbated the problem and this was my last resort. The first attempt cleared two of the four heads and then the second attempt finished the job, leaving me with a perfectly working printer again. Highly recommended.Verified purchase: YesCondition: New
