CURRENTLY SOLD OUT
About this product
Product Identifiers
BrandHogue
MPN73000
Ean0743108730003
GTIN0743108730003
UPC0743108730003
Model73000
eBay Product ID (ePID)17034686273
Product Key Features
For Gun TypeHandgun
For Gun MakeTaurus
TypeGrip
Additional Product Features
Custom BundleNo
Ratings and reviews
Most relevant reviews
- 10 Sep, 2018Most favourable review
Better than original
This grip completely outclasses the original grip on my Taurus judge. It came with a ribbed grip that by this point was crumbling and even new it was hard to grasp. The original also liked to twist in the hand when Shooting. The hogue is much better at absorbing recoil and is much easier to grip. The gun should have been made with this hogue grip. The one I bought included a new screw, which worked perfectly. I would recommend the hogue grip to anyone with a Taurus judge, as a necessary addition. It didn't include my model number (4411) as supported but a quick call to taurus confirmed it would fit, as the 4411 is the same as 4410 just without a hammer. 4411 is the concealed carry model. Since a replacement original grip from Taurus is nearly 70 USD the hogue grip is a steal at 20 USD. In the pictures you can see the hogue grip on the gun and just how tattered and pitiful the original grip is. Anyone wondering what happened to the paint on my gun should know that this is what a blackhawk nylon holster will do to a gun. Which I pictured as well.
Verified purchase: YesCondition: New
- 08 Aug, 2018Most critical review
Mounting screw holes don’t align properly.
I have the Judge 3” magnum. The grip itself is Hogue quality. However, the screw hole through the bottom of the grip did not line up precisely with the hole in the frame. It was kind of a “halfway” match. I spent hours carving out plastic in the grip hole until both holes were lined up. I finally got the screw in and tightened up. The problem here with me is that I don’t like to have to modify something brand new to make it work. If I had known this before hand, I never would have bought the grip.Verified purchase: YesCondition: New
- 19 Mar, 2022
Great grip that saves my knuckle!!
I inherited a Taurus Tracker 455 revolver (5 shot .45 auto). The original grip placed my middle finger center knuckle tucked up behind the trigger guard where every shot snapped the trigger guard back into my knuckle, very painful. After searching the net for solutions I came upon this grip with good reviews. After very simple (2 minutes) installation I noted my knuckle was moved down enough to clear the trigger guard, making shooting altogether painless. I have large hands (size 13 gloves, XXL when I can find them) and the grip is comfortable without being bulky. Pictures below show the original grip and knuckle placement plus Hogue grip with better knuckle placement. I highly recommend this grip as a very cost effective solution that changed my Taurus Tracker from a paperweight to a fun shooting firearm.
Verified purchase: YesCondition: New
- 07 Feb, 2019
Perfect fit for Taurus Tracker 44 Mag with 4" ported.
First of all, this seller is amazing. This arrived almost 1 day after being ordered. Thank you so much. Next, the product. This grip is amazing. The mushy "ribber" grip that comes on the tracker is horrible (my opinion). It is hard to get a good grip on the gun and you NEED to have a good grip for this beast (Tracker 44 Mag 4" with porting). This grip slid on perfectly as Hogue is known for. It included a longer grip screw that needed some delicate guiding to start the threads. Go slow and start the screw by hand. It does fit in well but seems to be angled a bit differently. The fit is perfect and this is the grip that really should have come with the gun but again, just my humble opinion. This seller had the best price and I will actually search for this seller next time I am ordering. Thanks again for the lightening-quick shipping. Very appreciated.Verified purchase: YesCondition: New
- 18 Sep, 2019
Works for Taurus 445 Ultra Lite .44 special.
I bought this for my Taurus 445 Ultra Lite .44 special five shot, it fit with no issues. There are just two pieces in this package which are the grip itself and the screw. The grip is one piece and the screw is a bit longer than the original. It does not need any other parts, and once installed is totally secure. It is not as hand filling as the original ribber grip, though it is slightly longer and allows all my fingers to hold onto the grip. What it does much better than the original grip is keeping my middle finger from hammering into the trigger guard while shooting. It is a bit "grippier" than the original ribber grip, and may be somewhat more abrasive if you have soft skin. However, if you shoot much, that grippy-ness will smooth out a little bit and not be as abrasive. It's a good grip and what I would consider upgrade to the stock grip and is now much more enjoyable to shoot with this Hogue grip on.Verified purchase: YesCondition: New
- 17 Oct, 2018
Must have upgrade
At first I was worried because the packaging only said Taurus Tracker instead of Tracker/Judge. In the instructions it clarifies the grip does fit the Judge (standard model). I have hogue products on several firearms and they are outstanding products and affordable. The Hogue grip for the Judge fits tightly, contours well with the metal frame, and is a huge upgrade from the factory Taurus “mushy” grip. The Hogue grip is comfortable and allows all my fingers to be on the grip. Make sure not to over tighten!
Verified purchase: YesCondition: New
- 23 May, 2017
tauras hogue grip
Taurus should install these from the factory, even if it made there gun's cost 8 to 10 dollars more, very nice grip I would say I have med. size hand and they fit me perfect, factory grip feel o.k., but when you start shooting 44 mag. around 30 to 40 time's you figure these grip's are pretty much junk, I am now happy with my Taurus ,love the gun , love the grip's Thank You, Richard B. , Lufkin, Texas,..............Verified purchase: YesCondition: New
- 12 Jun, 2017
Like a glove!
Honestly if Hogue grips came standard on ALL firearms the world would be a better place! The soft factory rubber grips on my Taurus 45 LC snub nose did not control the recoil while shooting 225gr semi jacketed loads rendering the gun useless to me. No sooner I installed the Hogue 73000 grips to the frame, which took all of 3 minutes, I was back in business grouping 1.5 inch shots @ 10yds. I highly recommend these grips!Verified purchase: YesCondition: New
- 03 Jun, 2017
Fits nice
This grip installs easy, fits gun firmly. Feels good for medium size hands. Very happy with it. The diamond pro pacmyer was to big for my hands. The stock grip was just to squishy for my tast. This one is just right.Verified purchase: YesCondition: New
- 26 Jan, 2021
Nice gripes
Nice gripes but had to have a gun Smith put it on. I would recommend having a gun Smith put them on your hand gun. I put these on my taurus 627 4 inch 357 magnum also my Daley carry these grips work prefect. Also use this for deer hunting great grips buy them you won't be disappointed.Verified purchase: YesCondition: New
