CURRENTLY SOLD OUT
About this product
Product Identifiers
MPN050095
GTIN0090255500950
UPC0090255500950
ModelCam Lock
eBay Product ID (ePID)1725249312
Product Key Features
Ammunition TypeRifle
Press TypeSingle Stage
TypeCase Cleaner
Ratings and reviews
Most relevant reviews
- 31 Aug, 2021
A very good tool for removing bullets for people who reload.
I have this tool and the Berry’s hammer tool to remove bullets. When you are starting to reload a new powder that there’s no information about the start and max you typically create 5 rounds of a few different loads and test them at the range. If you have some that are too high or low you want to adjust the load. So, you need to remove the bullets and redo the load. There are other circumstances too. This tool does the job so quickly and with hardly any powder mess. It takes a bit to setup for different types of bullets (HP, SWC, RN, etc). You do have to purchase a different collet for various calibers. I keep one setup for 9mm and another for 45acp. The only negative is sometimes the pulling the lever can be tough and hurt your hand. I keep a fiber cloth on the handle.Verified purchase: YesCondition: New
- 27 Apr, 2016
A valuable tool for creating Mexican Match ammo
Have several hundred rounds of 7.62X54r Russian ammo that shoots lousy groups in my VEPR. But, simply by pulling the factory bullets on the ammo and replacing them with .312 diameter Hornady 150 grain soft points, the rifle is now WAY more accurate. The Hornady bullet puller does the job well. Recommend the Lee factor crimp die to finish the job.Verified purchase: YesCondition: New
- 19 Feb, 2019
HELPS YOU SAVE MONEY!!!
An excellent unit to recover reloading mistakes or to pull down surplus ammo, saving you $$$$ in the long run. PROS: Really works best in a single stage (obviously), but can be used in a progressive if need be. Super easy to setup with the correct insert. Leaves no real marks on the projectile. Make sure you pull slow to keep the powder from flying out with the inrush of air behind the bullet. Yes, it creates a vaccum when the bullet is pulled. CONS: Can be a little finicky with certain projectiles and the adjustment being hard to set with the locking nut at times. Just leave it sort of looses and go by feel. Frangibles do not fair well without some practice... mine was 20 or so before I got it down. They snap in half at the case mouth, if you apply too much pressure, leaving a total loss. All in all a good value, made well, simple to use and best of all helps SAVE YOU MONEY! Enjoy...Verified purchase: YesCondition: New
- 23 Nov, 2017
Hornady cam lock bullet puller
This is a wonderful addition to my reloading equipment. It works so fast and easy, and as of yet I havent had any bullet damage. Diameter and thread size fit most if not all presses. I am so glad I purchased this.Verified purchase: YesCondition: New
- 23 Jul, 2019
Best bullet puller I've tried...way better than kinetic......
This bullet puller is way and I mean way better than the kinetic pullers. It grabs the bullet and pulls it out of the case.....and does not damage the bullet. The only thing that you will have to get is the correct caliber bullet cam lock...each caliber has its own cam lock....not a real problem as they are inexpensive. This device pulls bullets way faster than any other I have tried. If I load up some bullets and find that I was not happy with the powder weight or the powder itself, I can then pull the remaining bullets and not waste them or spend tons of time pounding a kinetic puller on the bench. Perfect for re loaders who are working on getting their loads and rifles to sync for the best performance. Don't waste your money on other pullers. Just get this one.....you will need a single stage press but a Lee press for about $25 can be bought new and then you are good to go.Verified purchase: YesCondition: New
- 28 Jun, 2016
reloading
Best tool I have bought for reloading everyone should have one .. very easy to use and easy buy one now make your life betterVerified purchase: YesCondition: New
- 28 Aug, 2018
Best bullet puller available.
Fastest and easiest way to pull bullets. Costs just a little more than RCBS. Most bullets show no pull marks. Wish I would have bought one sooner.Verified purchase: YesCondition: Pre-owned
- 19 Mar, 2022
Works great, easy to use
Easiest to use of any collet type puller I have seenVerified purchase: YesCondition: New
- 06 Sep, 2018
Great tool!
This tool is easy to set up and it works very well. I was surprised at how little force must be applied to the handle to ensure a solid grip on the bullet being pulled. The tool does not damage the bullets at all, and they may be re-used.Verified purchase: YesCondition: New
- 09 Oct, 2023
The Best
Works great i had hammer type threw in trash, this is real quality
Verified purchase: YesCondition: New
