The lowest-priced, brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable).Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag.See details for additional description.
£3.69
Free postage
Get it by Saturday, 6 Mar from Hillingdon, Middlesex
• New condition
• 30 day returns - Buyer pays return postage | Returns policy
Energy Saving Halogens. Fitted with Integral safety fuse with build in safety on failure end of life. LED Panels. LED Light Bulbs. Power Output. 1 2W Driver. U p to 30000 hours per LED. M R16, MR11, G4 or LED strip.
Ideal for LED downlighters. Bulb is 6 watts so I chose a transformer that will deliver up to 12 watts and all lights are working as they should. (I replaced halogen bulbs with the LEDs but found the lights were flickering occasionally until I realised the transformers were delivering in excess of 50 watts and had to be replaced.) I fitted one transformer to each light fitting.
Bought to power LED strips about 1 metre long, taking about 0.4A current each. The units worked, but produce quite severe interference on the FM radio band. Wrapping them in aluminium foil will reduce but not cure this, and have had no luck with ferrite cores on the leads. Also tend to drop out for a few seconds occasionally (perhaps once a week) for no apparent reason. Although only supplying about 0.4A they get quite warm, even when not wrapped in foil. I shall not buy any more of these and am currently looking for replacements.
Works well with LED, but little delay when switched on
It works with 5W LED well. The connectors are very convenient to make connection to existing wires. When it is switched on, there is little delay. I am not sure if the delay is normal with this type of transformer.
Amazing value, small and easy tto wire. Be aware that it only works with standrd LEDs not dimmable LEDs. It seesm to accept almost any AC input voltage from 240 downwards - and still gives a clean 12v. If you want to dim the bulb by reducing AC voltage it ignores this and the LED stays on full brightness.
For regular LEDs its great.
This LED driver is effective with my high luminosity Phillips LED M16 bulbs (8W). It is compact and seems excellent value for money. One negative is the absence of inclusive "tails" so involves a bit of extra work making up tails with proper crimp ends to the cables.
