Picture 1 of 9
Stock photo
Picture 1 of 9
Stock photo
Bond It BDAK45 Heavy Duty Gun Foam Applicator
A
ALEEZAY FASHIONS (20879)
99.1% positive Feedback
Price:
£13.19
Free postage
Returns:
30 days return. Buyer pays for return postage. If you use an eBay delivery label, it will be deducted from your refund amount.
Condition:
Bond It Heavy Duty Foam Gun Universal Expanding Foam Applicator PU DIY Sealant Features: Easy to use handle Non returnable valve Teflon coated to prevent foam from sticking to the gun Product Specification: Weight: 0.4 kg PRODUCT DESCRIPTION Made entirely of metal, it is robust and easy to handle with its ergonomic hand-grip made of anti-solvent nylon. Body, adaptor, non-returnable valve and nozzle are teflon coated to prevent foam from sticking to the gun and facilitate cleaning. Exceptionally hard wearing gun parts – this is a gun for life!! APPLICATION PTFE ball valve Variable extrusion rate CE safety classification All measurements are approximate and taken at the maximum points of the item, unless otherwise stated. Please read our delivery information below before.
- Buy it nowBond It Heavy Duty Foam Gun Universal Expanding Foam Applicator PU DIY Sealant
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
About this product
Product Identifiers
BrandBond It
MPNBDAK45
EAN5060021367228, 0696583755170
GTIN5060021367228, 0696583755170
eBay Product ID (ePID)18027209961
Additional Product Features
Custom BundleNo
Non-Domestic ProductNo
ColourBlack
Featured RefinementsExpanding Foam
Modified ItemNo
Sub-TypeCordless Glue Guns
TypeHome/ DIY Adhesives
All listings for this product
Ratings and reviews
Most relevant reviews
- 25 May, 2017Most favourable review
One of the few that work properly
We buy on average about three of these type of guns a year, we have bought cheap Chinese ones for about £5, expensive so called professional ones for over £20 and now this circa £10 Bondit one. They all basically work the same but the £5 unbranded ones are more difficult to accurately control the foam flow and on a daily start up need a hard pull of the trigger to get going resulting is a burst of foam being ejected. The £20+ ones look posher with die cast aluminium bodies but don't actually work any better than this Bondit one. The Teflon coat on this Bondit gun seems to be more decorative than functional as the dried foam still sticks to it like glue, having said that scraping it off does seem to be slightly easier than on the uncoated guns but as I have said it still needs to be scraped off with a knife. The reason we get through so many guns is that we use them for a few months and then not all for several months, during this non use period the foam hardens in the non-return valve under where you screw the foam can in and removing it is a very time consuming job and often results in the valve leaking so can changing becomes a very messy job. We have tried both running gun cleaner through immediately after its last use as well as just leaving he can on and both have the same result, new gun required. Having said that this is our first Bondit gun so who knows it may actually work in a few months time when we next try and use it... We only use fire retardant foam and this is the foam that causes the gun failure problem. The adhesive foam we also occasionally use does not seem to cause this problem so the gun we use for that keeps on working. One last tip, when you first attach a can of foam, never just give the gun trigger a quick pull unless you hold it on to get a good blob of foam discharge. Failing to do this will result in the foam reacting with the air already in the gun and within an hour all the foam in the gun will have set and you will then have hours of cleaning to do or, buy another gun...Verified purchase: YesCondition: New
- 07 Sep, 2016Most critical review
Teflon not...
Teflon has a great resistance to solvents like acetone. Gun cleaner is made from acetone but if you soak it in acetone the 'teflon' paint peels off so I didn't think much of that. The nut wasn't tightened properly so it leaked foam into the trigger action. Even though I cleaned it thoroughly inside and out the little ball seal got jammed up. To cap it all, two out of the three Instastik canisters I used leaked all their propellant after I'd removed them to clean the gun. I went back to a conventional cartridge glue after all that mess. No more foam glue for me.Verified purchase: YesCondition: New
- 22 Jun, 2016
Great product
I'd never used one of these before so I was a bit apprehensive as I was aware that expanding foam can set quickly. It's easy to use and easy to clean with the correct gun grade cleaner. I also discovered that you can disconnect a can of part used foam clean the nozzle of the foam can whilst spraying cleaner through the gun. You can then reconnect the can of foam when you're ready to use it again. The foam and cleaner comes out with some force so beware of where you're pointing it!!Verified purchase: YesCondition: New
- 16 Sep, 2019
Great for professional use
I’ve used this item every day for month highly recommend this product and the useful tubes to help application of the foam. Holds a Hilti foam can perfect unlike others out thereVerified purchase: YesCondition: New
- 10 Aug, 2016
Far better than hand held foam
This is a very useful tool, far better than hand held foam. You need a lot of foam gun cleaner, and more importantly you will need to dismantle it to clean it. That was quite difficult, and a manufacturers diagram would have been helpful. There is a tiny spring on the non-return valve, that seats the ball bearing. I've lost mine.Verified purchase: YesCondition: New
- 04 Mar, 2020
Excellent product
Having used several of these guns over the years, being meticulous with their care, between cans I always run some cleaner through it then put new can on immediately and always store upright. Some others still don’t last very long or generally don’t operate very smoothly, this gun is the best I’ve used, hence ordering a 2nd one as I always keep a spare.Verified purchase: YesCondition: New
- 28 Sep, 2017
It could be ok - but it lasted ... very shortly
I purchased this gun as I used bond it guns before. This one was faulty as there was a leak next to the trigger. I tried to tighten it to stop the leak - and it snapped what made it impossible to return it (as I tried to fix this). I will not buy this again definitelly!Verified purchase: YesCondition: New
- 28 Jan, 2019
Bond It 'BDAK45' expanding foam applicator gun
Seems fairly robust and well made considering the price paid. Has recently been used with Soudal 'Soudafoam Gap Filler' (excellent foam) and this applicator performed very well with good adjustment and was a joy to use, so can't fault it. Too early to comment on longevity but hopefully it will last provided its cleaned & maintained properly with gun cleaner which is essential. I looked at quite a few of these applicators before deciding on this one which is better made than the slightly cheaper non-teflon Bond It. Also has a longer barrel length too which is always useful.Verified purchase: YesCondition: New
- 04 Oct, 2017
Foam Gun
Having owned the foam gun for less that 6 weeks it has appeared to deteriorated quickly. I have no control over the foam itself and just goes everywhere now. disappointingVerified purchase: YesCondition: New
- 05 Mar, 2020
Excellent applicator gun
Easy to use, and adjust. the Teflon coating does seem to be effective in reducing sticking. So much better than using the disposable canisters. Would recommend this product.Verified purchase: YesCondition: New
