 |
This is a 10A micro switch I use them to replace the 3A switches fitted in my Drayton motorised valves. They do, however, require a larger force to operate them, this may have caused the locating lugs in the body of the unit to fail on one of my valves. This meant replacing the whole head, as there is no way to hold the switch in place. So if you are using one of these switches for this purpose check the lugs at the back of the switch before you start. Saying that I would not recommend it and it is of poor quality, is really to do with the valve and Drayton for using a switch, which in my opinion is not up to the job.
Verified purchase: Yes | Condition: New
I bought these to replace the troublesome microswitches in 2 Danfoss HPA2 motorised valves. They had a higher amp rating than the ones I took out so hopefully will last a lot longer...
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Microswitches
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
