I chose to use this as an adaptor I already had a couple of spare Vesa brackets but both were 100mm max and I needed to bracket a 43inch TV with 100 x 200 Vesa The only problem I had was that I first put the plate on the wrong way so do be careful that you put the plate on so thst it matches the vesa screw holes on your TV Apart from that it was easy and is good quality I also suspended the sound bar from it
Verified purchase: Yes | Condition: New
I purchased this product as I wanted to increase the size of my wall hung tv without having to purchase a new swivel bracket This product had the answer fitted in minuets and does the job perfectlly
Verified purchase: Yes | Condition: New
This adaptor covers all the usual VESA sizes up to the maximum stated. It adds very little additional weight to the existing wall bracket and saves having to drill a new set of holes in the wall. It is well-priced and easy to fit using the collection of spacers and bolts supplied. First Class...
Verified purchase: Yes | Condition: New
Arrived promptly. Exactly what I needed, and easy to use between Vesa 100x100 wall mount and new (very light) TV/DVD combo with 200x200 mount screw holes on rear. 15-20 mins max to fit, select correct screws (supplied) etc
Verified purchase: Yes | Condition: New
This bracket was bought to convert the existing front plate on a tilt and swivel TV bracket to take different VESA hole spacings thus avoiding having to change the complete bracket. This converter plate fitted easily onto the front of the existing bracket plate using the some of the bolts provided and it was then relatively straightforward to fit the replacement TV onto the converter plate using the appropriate set of holes. The only difficulty was in holding the replacement TV high up against the new converter plate, aligning the holes and then bolting the TV securely into position.
Verified purchase: Yes | Condition: New
the screw holes don't match up to my T.V holder that's on the wall, but it's not the problem with the plate it's the holes on the wall mount I had the same problem before I changed the plate to the new plate where the screws holes dont line up right. The only problem I had is the plastic washers to keep the plate from back of the T.V is not deeper enough to hold the washers with your fingers between the plate and T.V.
Verified purchase: Yes | Condition: New
bought a bigger tv and as the bracket was good quality I needed this plate to fit the tv on. Good quality, easy to install & much cheaper than a replacement bracket. Also future proofs the bracket for even larger tv's.
Verified purchase: Yes | Condition: New
Well made product good finish easy to fit does what its meant to do
Verified purchase: Yes | Condition: New
what a simple idea that works very well and simple is best
Verified purchase: Yes | Condition: New
Worked very well to mount my 32" monitor with 200x200 vesa mount, to an old eizo 100x100 vesa stand. Needed to drill out the holes in the stand a little to fit the thicker screws provided with the mount, but it worked well and feels very sturdy. The mount itself was well machined from thick metal, and well painted, and supplied with all the screws I needed to mount the plate to my monitor and the stand. Also came with a few spacers and additional screws that I didn't need in my case. Very happy with it, and a bargain for the money imho.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in TV Stands & Mounts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on TV Stands & Mounts