No drilling APU / Heater fuel connection
I Installed this in 5 min. Looped fuel line between pickups 1 & 2 until APU installed. Easy to insert into my tank.
Pros:
*NO DRILLING! needed to connect an APU or Webasto / Eberspacher / Espar type diesel-fired bunk heater or other fuel connection to fuel tank.
*Works on all fuel types
*Easy screw in where existing roll-over vent located
*Existing vent screws into top of pickup, no new vent purchase required
*2 fuel pickups & 1 return fitting & extra plug included
*2 fuel pickup tubes welded together, easy to cut to length if too long
*No metal shavings in bottom of fuel tank
*Does not weep fuel around the fitting if installed properly like the drill type pickups do. Use pipe sealant for added safety
*SAFE for roll-over, vent angle is the same and acts exactly like factory vent if tank is tipped on side or over
*Better than factory position when topping off tank. Fuel can't surge up vent and spill down inside of tank like factory position -doesn't lose fuel like lower vents do
Cons:
*Fittings need 4 1/2" clearance above tank,
CHECK CLEARANCE BEFORE INSTALLING
*Might be higher price than some drill type add on pickup tubes
*No pickup filter or screen installed
Verified purchase: YesCondition: New