Kärcher Control Head

Power Tool Centre (471075)
99.7% positive Feedback
Price:
£26.98
Free delivery in 2-3 days
Estimated between Mon, 4 Aug and Tue, 5 Aug
Ships today if you order in the next Ships today if you order in the next 6h 12m
Returns:
60 days return. Buyer pays for return postage. If you use an eBay delivery label, it will be deducted from your refund amount.
Condition:
New
Genuine Karcher 9.001-361.0 Pressure Washer Control Head For Most K3 K4 Models Power Tool Centre Proudly Offers Genuine Karcher 9.001-361.0 Pressure Washer Control Head For Most K3 K4 Models Description At this control head the water inlet elbow is connected with a metal bracket, which is shaped like an "U". On the pressure side the connection elbow is also connected with a U-shaped metal bracket. Please note: The control heads 9.001-104.0 and 9.001-361.0 are similiar. Please verify with the product's images, if this version 9.001-361.0 is the right part for your high-pressure cleaner. This product replaces the products 9.001-276.0, 9.001-676.0 und 9.036-686.0 Compatible products*: This control head is compatible with a lot of models (see list below). If your machine is .

About this product

Product Identifiers

BrandKärcher
MPN90013610
EAN4039784243200
GTIN4039784243200
eBay Product ID (ePID)19015899158

Product Key Features

TypeParts - Control Head

All listings for this product

Buy it now
Any condition
New
Pre-owned

Ratings and reviews

4.6
84 product ratings
  • 69 users rated this 5 out of 5 stars
  • 8 users rated this 4 out of 5 stars
  • 2 users rated this 3 out of 5 stars
  • 2 users rated this 2 out of 5 stars
  • 3 users rated this 1 out of 5 stars

Would recommend

Good value

Good quality

Most relevant reviews

  • Most favourable review

    k series repair

    If your Karcher k3 or 4 series machine is switching on and off and leaking from the bottom with low pressure, this could be the problem. it's a bit fiddly to fit but if you like to get in and about machines and repair things then at this price its a good option.

    Verified purchase: YesCondition: New

  • Most critical review

    A built in problem

    This control head contains the pin assembly that switches the motor off when it reaches pressure as the trigger is released. Unfortunately there are two lengths of pin , Long and short , the replacement control head is fitted with a short pin , if you fit this where the original head has a long pin, it doesnt turn off , so over pressurising the whole motor/pump/valve assembly , damage can result almost immediately, the control head should be sold bare , so you have to change ALL the internals

    Verified purchase: YesCondition: New

  • Well made

    This piece fit perfectly to my k4 washer.I have seen others that need to be adjusted to fit but this worked a treat. Easy to fit if you just do everything slowly.

    Verified purchase: YesCondition: New

  • As good as it gets.

    Easy to fit but if you are changing one make sure to buy a new rubber seal ..

    Verified purchase: YesCondition: New

  • Best value to repalce broken item

    Item seems like original! Made from good plastic. All details are in place. Very good quality!

    Verified purchase: YesCondition: New

  • A genuine replacement part-Easily fitted.

    Looks totally to be a genuine replacement part. For a first time experience of replacing this part, approach the job methodically with the motor and pump stood upright and ensure you remove all the parts from the old pump head and transfer to the new one, smear a small amount of silicone grease on any 'O' rings so they all enter easily.

    Verified purchase: YesCondition: New

  • saved my KB5050 from the scrapheap

    Purchased this replacement head assy to fix my broken KB5050 Karcher washer. Seems like it is a common problem, the original had a hairline crack in It so purchased this replacemnt, worked a treat, no leaks , full pressure and it is back working as it was when it was new.

    Verified purchase: YesCondition: New

  • good

    Although it was advertised to fit a K4, it wasn't the correct one for my K4. It needed to be more specific in the advert. the Item was well made and would have been great if it fitted my machine.

    Verified purchase: YesCondition: New

  • done what it supposed to do.

    good price & done the job great.

    Verified purchase: YesCondition: New

  • Karcher control head.

    Brilliant part. Exchange went really well. Thank you.

    Verified purchase: YesCondition: New