CURRENTLY SOLD OUT
About this product
Product Identifiers
BrandHogue
MPN60020
UPC0743108600207
Model60020
eBay Product ID (ePID)1904099890
Product Key Features
For Gun MakeHogue
TypeGrip, Rubber Grip
For Gun TypeHandgun
Dimensions
Weight0.2lbs.
Ratings and reviews
Most relevant reviews
- 01 Mar, 2017Most favourable review
Works great with my SW Bodygusrd 38 special revolver.
I loved the size and features of my Bodyguard revolver but it was no fun to shoot because of the stock grip. It was too small and the recoil was painful and made it difficult to shoot accurately. The Hogue grip literally solved all my issues with the gun. I now enjoy shooting it and can fire it all day with much greater accuracy. It was very easy to install. Recommend you watch the YouTube install video first. Made it simple.Verified purchase: YesCondition: New
- 30 Oct, 2017Most critical review
Poor Quality
The grip is a good design but the quality of the parts ruin the product. The instructions are confusing because they try to explain how to install the grip on different models but do not which instruction is for which model. The grip has two main sections, the first and largest went on very snug but no problems. The second and smallest that went on the bottom would not fit because the stock pin had treads and a nut on each side so it could be centered but the nuts would not go into the slots in the bottom grip. After repeated attempts to install the bottom section it was removed and I took one of the nuts off the stock pin and tried to slide it into the slot on the bottom grip section. The nut would not fit into the slot because the slot was to small or the nut to big. I left the nuts off the grip pin and the bottom grip went on but is a bit loose. It is to much trouble to return so I will just count it as a lesson learned.Verified purchase: YesCondition: New
- 16 Jun, 2020
Best J-frame grip.
I've tried several grips and this is the standout best. Perfect size: able to grip with all fingers (including pinkie), but is only moderately larger than the original "boot grip." Still good for concealed carry. Easy to install. Fits my S & W 640 J-frame perfectly. High rise coverage and padding over back strap really aids in "feel" and management of recoil. Perfect rubber material; just the right "stickiness." Hogue ergonomics are so superior to Pachmayr, Altmont, Sile, etc. This should be the standard grip for the S & W J-frame revolvers. Very well made--although I bought a 2nd grip just in case they stop making this one.Verified purchase: YesCondition: New
- 19 May, 2020
Perfect grips to tame this little .357
These Hogue grips that I purchased for my S&W 340PD arrived well-ahead of anticipated delivery in perfect condition, and were easy to install. Although I have not test-fired it yet, I have a MUCH better grip on the gun, and the grips now cover (and pad) the once-exposed metal backstrap.Verified purchase: YesCondition: New
- 08 Jan, 2018
Great grips and easy to install
I installed these on my S&W 340 M&P in less than 5 minutes. The fit is perfect and I can still carry concealed with no problem. The gun came with the Bantam grips but I like these much better.Verified purchase: YesCondition: New
- 02 Jun, 2020
Best upgrade to a Smith & Wesson .38 revolver
The hard plastic grip that comes standard on the S&W .38 Bodyguard revolver is hard to hold. This Hogue grip is hard rubber and has a better contour for the hand. I highly recommend this upgrade. Too bad S&W didn’t make this their standard grip.Verified purchase: YesCondition: New
- 04 Mar, 2020
she loves it again
the S&W 38 special bodyguard is my wife's pistol,she picked it out loved the way it fit her hand,the laser,how she could just drop t in her purse. then she shot it. she turned to me and said I hate this gun! after I put the hogue grips on it she loves the gun again.Verified purchase: YesCondition: New
- 18 Jun, 2019
What A Difference
What a difference this Hogue grip model 60020 makes on a 38 S&W model 642 Airweight J-frame. The grip fits and fills the hand much better. I do not have large hands I should have made the grip change years ago. The grip is a tight friction fit in two parts. I had no trouble installing the grip in about 5 minutues.Verified purchase: YesCondition: New
- 01 Feb, 2018
Very Useful
Not only does it make the recoil bearable, the fact that you can get all fingers comfortably on the grip changes the geometry of your hand in relation to the trigger enabling you to press it back more easily thus enhancing accuracy.Verified purchase: YesCondition: New
- 06 Sep, 2017
Works OK on a 642
It took me a while to figure out how to install these, the instructions aren't very good. You have to use the "Centennial" instructions for the S&W 642 Airweight. It's difficult to fit the bottom piece on also, study it carefully as it seems impossible until you figure it out, then all of a sudden they slip on. To be honest, I don't notice all that much of a difference when shooting the 642. In fact, it was a while from when I installed the grips until I brought the 642 to the range and I had forgotten about them. I didn't notice any difference until I got home and realized the new grips had been installed and I thought "Hmmm...I didn't notice much." But overall, they look good and I'm satisfied. The 642 kicks like a mule, there's no getting around it. I'm working up a low-recoil load using lead cast bullets, but that's another story...
Verified purchase: YesCondition: New
