Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Cleaning Supplies
however, I only gave it four stars because the "cross handle" is completely useless. on my gun at least, which has the 6.5 inch slip tube. by the time you slide the wrench down the tube to engage the crown hut, you cant insert the cross handle! I suppose the handle would work on shorter tubes where the wrench doesn't slide down as far...? but for me? I just slid the wrench down the tube, which was a good 4 inches or so, and then tightened it by hand, at which point I use a pair of channel locks to really cinch it down. worked fine. inexpensive as well. would recommend!
Verified purchase: Yes | Condition: New
The main part of the tool seems to be good quality. It is a tight fit for the composite REmington 870 forend, but it is EXACTLY the same diameter as the retaining ring, so the issue lies with the fitment of the forend, not the tool. The one complaint that doesn't allow me to give more stars, is that the bar is to thin and short to give adequate leverage. You will likely need to drill out the holes and put a longer, hardened steel bar in to get the retaining ring loose. I made it work, and for only $10, I'm still glad I bought it.
Verified purchase: Yes | Condition: New
The tabs were to thick to use on the model 12 and model 1897 Winchesters, would have to grind the tabs down to work correctly. Ended up buying a different type for those, worked good on the my other models of shotguns. I would recommend , just need to check the fit.
Verified purchase: Yes | Condition: New
Didn't know this tool existed, and when I received it I was doubly surprise of the good quality of the product. Thank you very much for a fine product.
Verified purchase: Yes | Condition: New
I needed this item to be able to replace the forearms on my shotguns, and it’s perfect. Easy to used and makes changing simple. Heat price as well.
Verified purchase: Yes | Condition: New
Economical but totally useful tool. A good choice for occasional fore end work
Verified purchase: Yes | Condition: New
very easy to use, causes no damage, fits very well.
Verified purchase: Yes | Condition: New
THIS PRODUCT IS VERY INEXPENSIVE, YET IS ESSENTIAL TO REMOVING THE FOREARM OF THE SHOTGUN. MADE A TOUGH JOB SO VERY EASY AND SMOOTH. BUILT OF HIGH QUALITY STEEL, IT IS UP TO THE TASK OF REMOVING SOME OF THOSE FOREARMS THAT WERE INSTALLED WITH A JACKHAMMER AT THE FACTORY. HIGHLY RECOMMENDED FOR THE PROFESSIONAL AND DO IT YOURSELFERS.
Verified purchase: Yes | Condition: New
Used on an 870. It is a hair too big. I used a grinder to bevel the front to help force it in the forend. Got it to work but I was disappointed.
Verified purchase: Yes | Condition: New
good tool.
Verified purchase: Yes | Condition: New