Does a great job of changing gear on my 11-56t. I use this on my mid drive e-mullet that I use for exploring possible new trails that our 4 legged friends have started. At the price point of this mech I dont have too worry too much about it being trashed by the sticks, branches, bracken that you find lying on these type of tracks. It's not as well engineered as some of the higher end mechs, but does a great job of moving the chain up and down the cassette whilst keeping the chain tensioner. PS you need a hanger extender if you want to run anything bigger than 32t on the back.
Verified purchase: Yes | Condition: Pre-owned
Love these simple cheap derailleur's. Easy to set up you should not have to touch the A limit screw but the B limit will have to be moved if you are putting into a 7/8 speed this is the bottom of the two vertically aligned screws at the back of the mech. This does two things, stops the mech hitting the wheel and allows the mech to reach the largest gear. Probably the best upgrade you can do to a tourney gearset. After a short time the tourney's jump sprockets which I find irritating. Don't forget to change the cable inner at the same time. this is easy to do. often the shifter end of the cable is concealed, under the rubber grip (microshift) but I have never had to remove the shifter to change. If you don't know YouTube it! Have fun
Verified purchase: Yes | Condition: New
I have an old 2011 Bianchi Kuma 4400 and riding it it all weather's takes its toll on mechanical parts. Finding something that would fit and work without spending a fortune can be tricky but if the durailer is worn out as mine definitely was, I had to replace the entire chain set. No good just changing one main part as they wear in together and I tried to skimp but ended up with lots of slipping gears, which is dangerous because when you really need it you could injure yourself or fall in the road at a junction. So after setting it up I had to tweek it a little, all in all a good purchase that should last for many years.
Verified purchase: Yes | Condition: New
Well made, easy to fit & works smoothly. Ideal rear mech for use on all but top end bikes
Verified purchase: Yes | Condition: New
Works really well transformed my gearshifts, bike now runs super smooth and quiet.
Verified purchase: Yes | Condition: New
I had one of these before and it worked great but I had a hard fall and it smashed the derailleur and bent the dropout. it has not been fitted yet due to other circumstances I am purchasing another one because the last one was good and relatively cheap and if in the future this one gets broken I will buy another.
Verified purchase: Yes | Condition: New
Easy to fit, works great, quite easy to set up, and a good price.
Verified purchase: Yes | Condition: New
Relatively priced and good value. Fitting instructions easy to follow. Great deal
Verified purchase: Yes | Condition: New
If you need to use a large 34 sprocket on your 8 speed rear cassette then this is one of the best and cheapest rear derailleurs available
Verified purchase: Yes | Condition: New
Came in original manufacturers box, fitted Carrera Vengeance perfectly. It is a good idea to check youtube videos to set it up correctly.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Rear Derailleurs
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Rear Derailleurs
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
