CURRENTLY SOLD OUT
About this product
Product Identifiers
BrandBosch
MPNPBD40
eBay Product ID (ePID)1928254383
Product Key Features
Power (W)501-750
Voltage (V)240
Sub-TypeBench Drill
Drill TypeBench Drill
TypePower Drills
Corded/ CordlessCorded
Dimensions
Weight14 Kg
Ratings and reviews
Most relevant reviews
- 24 Jun, 2018
Lots of realy useful features
Easy height adjustment and good feel when drilling. Keyless chuck has lock/unlock ring so is easy to loosen even after using a 40mm Forstner bit. Laser picks up on pencil marks and makes pre-drilling holes for screws in wood and recycled plastic decking quick and reasonably accurate but when drilling metal mark out and pick up on your centre punch mark aided by the work light. The work clamp is so easy to use but you have to be careful not to put it in a position where the handle stops the drill moving down. The guide helps when drilling lots of holes at the same distance from the edge but gets in the way of the clamp if drilling thin material. Electronics give soft start and variable speed control while the low gear gives higher torque. Digital depth readout combines with easy to use depth stop for accurate depth adjustment but any zero offset you are using is reset if you accidentally switch off. Mount on a mitre saw stand to support long work pieces. It would be nice if Bosch sold the mounting rails separately so changing between saw and drill was easy.Verified purchase: YesCondition: New
- 01 Aug, 2018
Chuck Play
It's very easy to operate... Functions and readouts are excellent... It seems well made... BUT and it's a big one... The chuck has far too much play in it for precision work.Verified purchase: YesCondition: New
- 19 Sep, 2018
Bench Drill with all the features
Everything I could wish for is included in this machine. I have previously purchased cheaper models which ave up to 3mm sideways play and virtually none of the features of this model. Only small complaint is that the drill hole in the baseplate is too small and I have to place packing timber under the workpiece when drilling above 20mm diia.Verified purchase: YesCondition: New
