CURRENTLY SOLD OUT
About this product
Product Identifiers
GTIN5060320601276
UPC5060320601276
eBay Product ID (ePID)1939513003
Product Key Features
ColourBlack
FeaturesCustom, Removable
Ratings and Reviews
Most relevant reviews
- 24 Aug, 2016Top favorable review
Great quality, not easiest to work with
This is a great quality tool, steel is hardened and extracting pins are perfect fit for PSU connectors, and they are not bending at all. However, although quality is great I do have issues with this tool. Handle is too small and too thin and because of that it is impossible to put additional pressure when extracting pins, without leaving marks on your palm and finger. Larger or cylindrical handle would be much better solution. You will have to decide for yourself whether this tool is a good value for you, as there are pin removal kits consisting of 4 tools that are cheaper than this one. However, quality of those sets was questionable for me so I did not want to take chances and I rather went with seller I was confident in. If handle was better I would of give 5 stars to this product, even if I cannot justify 13$ price (with shipping) for a small piece of hardened steel.Verified purchase: YesCondition: New
- 07 Mar, 2018Top critical review
Good quaility, but flimsy and difficult to use
This is made from sping steal, which is high quaility. However, it’s not at all very aesthetic to use, hurting your hand. Also, as the metal “pins” are so thin they break so easily. Not to mention it doesn’t do it’s job very well. You are meant to push it in then be able to pull out the pin from the other side of the connector, but in no way is it that easy. Mine ended up snapping after spending 2 hours doing 6 pins. Ended up finding it much easier and quicker to cut the wire, sleeve, then solder and heatshrink.Verified purchase: YesCondition: New
- 23 Apr, 2019
Awesome tool; does the job; Slightly expensive but worth every penny in time saved!
Did the job perfectly. I had to remove a full 20 pin, 24 pin and 2x 8 pin connectors and it did them all with ease and shows no sign of cracking or fractures. The rubber does a good job insulting your hand from the sharp metal. It's a tad expensive for what it is. But if it means it lasts longer then I guess it's worth it. Tried paper clips and found it too fiddly.Verified purchase: YesCondition: New
- 22 Feb, 2017
It works with modification.
The problem with this tool is not that it doesn't work, it does, but it required a slight bend in the tip about 3mm from the end to fit in the connector. What actually worked the best for me was a large push pin used on my cork board at home. I still like the tool and was grateful for sturdy make of it. Thanks.Verified purchase: YesCondition: New
- 26 Jul, 2017
The only extractor tool you should even consider
Compared to other extractor tools, especially those on eBay, none of them come close to the quality and durability of this one. Instantly removes pins with no extra pressure and no bent prongs after a week of use.Verified purchase: YesCondition: New
- 03 Dec, 2018
Quality But Doesn't Work.
This extractor is of very high quality. Unfortunately, this tool doesn't work well. Staples work every single time. This tool works 1 out of 10. Staples are super easy to use. This tool is not. I want to love this tool. But it just doesn't work like it should.Verified purchase: YesCondition: New
- 29 Aug, 2017
Quality tool
Quality tool! . I really love this tool as it works so good!.it is extremely well made 👍Verified purchase: YesCondition: New
- 30 Apr, 2020
Lightweight champion
Could use a handle, looks bigger in the pictures. Good tool,did not break, but did bend a little. In all honesty I did have to remove more than 20 pins. Good overall quality, a little on the expensive side.Verified purchase: YesCondition: New
- 08 Nov, 2017
shakmods pin extractor
was a bit heavyhanded with the first one and broke it,but after great com with shakmods was sent a replacement which I give it the love it deserves and works a treat,big up to the shakmods teamVerified purchase: YesCondition: New
- 29 Apr, 2020
Acceptable for price - but who wants acceptable?
Size was close but the pins were not that strong a steel. So as too fat the pins needed a very hard push which eventually caused the pins to bend and then re-straightened. Needed higher quality spring steel and better precision.Verified purchase: YesCondition: New
