30 days return. Buyer pays for return postage. If you use an eBay delivery label, it will be deducted from your refund amount.
Condition:
NewNew
• Motorcycle dolly holds a single motorcycle with a side stand, weighing up to 500kg with weight being dispersed between front and back wheels. • Easy to manoeuvre around the workshop or garage. • Front wheel stays in contact with the ground allowing the motorcycle to be steered into the desired position. • Pivoting feature allows flexibility in side stand designs. • Side stand holder can be adjusted to cater to the majority of motorbikes. • Model No. MS0630
The build quality is second to none but the design is flawed. Casters with the brake lock won't turn fully without hitting the metal tray. Also if side stand is not located centrally within the side stand tray, the tray sags, drags on ground and makes movement difficult. And even if located properly it will invariably slide about as you try to move the bike. I was able to overcome these flaws by removing a piece of the castor brakes to allow them turn fully, and welding two small strips of metal to maintain side stand in correct position. Others may not be bothered doing this. Just to add my bike was less than 400kg so well within manufacturing recommended.
ITS STRONG AND WELL MADE BUT VERY HARD TO USE ON LARGE BIKES IT DIFFECULT TO CONTROL WITH THE FROUINT WHEEL STILL ON THE GROUND WHEN MOVING BIKE ON THE DOLLY THE SIDE STAND TENDS TO FOLD UP AND THERE IS NO WAY OF LOCKING IT IN PLACE
THE SIDE STAND HOLDER MOVES AROUND SO MAKES HAND TO PUT UNDER THE SIDE STAND AND HOLD THE BIKE UPRIGHT EVEN WHEN YOU LOCK THE BACK WHEEL ON TO THE DOLLY
ITS NOT EASY TO PUSH INTO PLACE DUE TO THE FROUNTWHEEL BEING ON THE GROUND YOU ARE BETTEROFF SPENDING A BIT MORE AND GET THE FALL LENTGH ONE THAT LOCKS THE FROUNT WHELL