CURRENTLY SOLD OUT

Yescom 25WSM003AUTO03 12 inch Powered Wire Stripping Machine

About this product

Product Information

If your work requires that you strip a lot of wire, this Yescom powered wire stripping machine gets the job done quickly. The 12-inch powered machine has a motorized cable stripper that works on most types of wiring and cables. It removes the plastic sheathing and insulation so that you can reuse the wiring or recycle it when you're done. The machine has an easy-to-use toggle switch for power and speed.

Product Identifiers

BrandVEVOR
MPNUNBSU001201509351765
UPC0640671068406
eBay Product ID (ePID)2129678184

Ratings and reviews

4.4
50 product ratings
  • 34 users rated this 5 out of 5 stars
  • 8 users rated this 4 out of 5 stars
  • 3 users rated this 3 out of 5 stars
  • 2 users rated this 2 out of 5 stars
  • 3 users rated this 1 out of 5 stars

Would recommend

Good value

Good quality

Most relevant reviews

  • Good little machine.

    So far a good little machine for the price. It takes a little bit of a learning curve to get it to run right, directions could be better. Once you get it dialed in, it works well. It can strip a lot of wire in a short amount of time. Was to strip anything from 14 AWG to 6 AWG. I've yet to strip anything heavier than #6, but it should handle the bigger wires, too.

    Verified purchase: YesCondition: New

  • Best budget wire stripper!

    I was sceptical at first when purchasing this, because I had a lot of copper to strip ranging from 12awg to 1" thick copper cable. WOW was I amazed at this little stripper! I actually found that the bigger the wire, the easier it is to strip. Thought I was gonna have to cut pieces into 6 foot strips, NOPE. 60 foot lengths of 3/8 copper wire! Ripped right through it! This thing paid for itself in two hours. I foundit easier to not use the feeder plates, and just hold the wire. If you hold just a little tension on the wire as it pulls, you can steer the wire as it's pulling it through so the blade is always centered. The blade can be sharpened, and replacements are available on eBay as well. Stripped $1000 worth of copper in one day, no complaints whatsoever. P.s. electrical tape will clog the feeder wheels and cause it to slip and not feed the wire through, so keep a steel brush around to clean the wheels.

    Verified purchase: YesCondition: New

  • Happy with purchase

    Works as billed. Very sturdy. Took a little fiddling and trial and error to get started as there were no directions included. Pretty simple so it was not that hard to figure out. Happy. Stripped a lot of wire once I got started. Will strip wire that is not perfectly straight no problem.

    Verified purchase: YesCondition: New

  • Great Tool

    This item works very quickly when run by a drill. You need to mount it to something with a lot of weight. Great tool.

    Verified purchase: YesCondition: New

  • I bought the least expense wire stripper of its kind

    Works better than I could have ever hoped for. I haven't tried small wire nor very large wire but for 2, 4, 6, 8 it works like a true champ. I haven't used it enough to dull the blade so I'm not sure of what I'm in store for at that point. So far I'm beyond happy with this product.

    Verified purchase: YesCondition: New

  • Good Value

    Better quality than I expected. The programming is a bit of a pain, but you'll figure it out. So far it works really well. I am using 16 AWG, 18 AWG, and 22 AWG wire with thin ETFE insulation, which means that it's harder to strip than wire with thicker insulation. Nevertheless, the machine is handling it pretty well so far.

    Verified purchase: YesCondition: New

  • trail and error.

    Took a few tries to get the hang of it, but once you do it works pretty good. much faster than a knife. Not really sure about quality/longevity only used a little bit. Probably works best mounted, you just have to find what works best for you

    Verified purchase: YesCondition: New

  • works as described

    Just used it today, have to learn how to set it up but once you get it right it does a great job, so much quicker, easier and safer than the razor knife. I would recommend if you have a good amount of wire.

    Verified purchase: YesCondition: New

  • Works well

    Works like I thought very easy to use for the most part. Does not automatically adjust for different gauge wire you manually adjust. Well worth the money I think

    Verified purchase: YesCondition: New

  • Worth the money

    Good product for the price. Easy to move around if need be. Doesn't take up a lot of room and is quiet.

    Verified purchase: YesCondition: New

More items related to this product